1. Connectors
2. DataStream Connectors
3. Kinesis

Amazon Kinesis Data Streams Connector

• Using the Amazon Kinesis Streams Service
• Configuring Access to Kinesis with IAM
• Kinesis Consumer
  • Configuring Starting Position
  • Fault Tolerance for Exactly-Once User-Defined State Update Semantics
  • Using Enhanced Fan-Out
  • Event Time for Consumed Records
  • Event Time Alignment for Shard Consumers
  • Threading Model
  • Internally Used Kinesis APIs
• Kinesis Producer
  • Threading Model
  • Backpressure
• Using Custom Kinesis Endpoints

The Kinesis connector provides access to Amazon AWS Kinesis Streams.

To use the connector, add the following Maven dependency to your project:

<dependency>
  <groupId>org.apache.flink</groupId>
  <artifactId>flink-connector-kinesis_2.11</artifactId>
  <version>1.12.7</version>
</dependency>

Attention Prior to Flink version 1.10.0 the flink-connector-kinesis_2.11 has a dependency on code licensed under the Amazon Software License. Linking to the prior versions of flink-connector-kinesis will include this code into your application.

Due to the licensing issue, the flink-connector-kinesis_2.11 artifact is not deployed to Maven central for the prior versions. Please see the version specific documentation for further information.

Using the Amazon Kinesis Streams Service

Follow the instructions from the Amazon Kinesis Streams Developer Guide to setup Kinesis streams.

Configuring Access to Kinesis with IAM

Make sure to create the appropriate IAM policy to allow reading / writing to / from the Kinesis streams. See examples here.

Depending on your deployment you would choose a different Credentials Provider to allow access to Kinesis. By default, the AUTO Credentials Provider is used. If the access key ID and secret key are set in the configuration, the BASIC provider is used.

A specific Credentials Provider can optionally be set by using the AWSConfigConstants.AWS_CREDENTIALS_PROVIDER setting.

Supported Credential Providers are:

• AUTO - Using the default AWS Credentials Provider chain that searches for credentials in the following order: ENV_VARS, SYS_PROPS, WEB_IDENTITY_TOKEN, PROFILE and EC2/ECS credentials provider.
• BASIC - Using access key ID and secret key supplied as configuration.
• ENV_VAR - Using AWS_ACCESS_KEY_ID & AWS_SECRET_ACCESS_KEY environment variables.
• SYS_PROP - Using Java system properties aws.accessKeyId and aws.secretKey.
• PROFILE - Use AWS credentials profile file to create the AWS credentials.
• ASSUME_ROLE - Create AWS credentials by assuming a role. The credentials for assuming the role must be supplied.
• WEB_IDENTITY_TOKEN - Create AWS credentials by assuming a role using Web Identity Token.

Kinesis Consumer

The FlinkKinesisConsumer is an exactly-once parallel streaming data source that subscribes to multiple AWS Kinesis streams within the same AWS service region, and can transparently handle resharding of streams while the job is running. Each subtask of the consumer is responsible for fetching data records from multiple Kinesis shards. The number of shards fetched by each subtask will change as shards are closed and created by Kinesis.

Before consuming data from Kinesis streams, make sure that all streams are created with the status “ACTIVE” in the AWS dashboard.

Properties consumerConfig = new Properties();
consumerConfig.put(AWSConfigConstants.AWS_REGION, "us-east-1");
consumerConfig.put(AWSConfigConstants.AWS_ACCESS_KEY_ID, "aws_access_key_id");
consumerConfig.put(AWSConfigConstants.AWS_SECRET_ACCESS_KEY, "aws_secret_access_key");
consumerConfig.put(ConsumerConfigConstants.STREAM_INITIAL_POSITION, "LATEST");

StreamExecutionEnvironment env = StreamExecutionEnvironment.getExecutionEnvironment();

DataStream<String> kinesis = env.addSource(new FlinkKinesisConsumer<>(
    "kinesis_stream_name", new SimpleStringSchema(), consumerConfig));

val consumerConfig = new Properties()
consumerConfig.put(AWSConfigConstants.AWS_REGION, "us-east-1")
consumerConfig.put(AWSConfigConstants.AWS_ACCESS_KEY_ID, "aws_access_key_id")
consumerConfig.put(AWSConfigConstants.AWS_SECRET_ACCESS_KEY, "aws_secret_access_key")
consumerConfig.put(ConsumerConfigConstants.STREAM_INITIAL_POSITION, "LATEST")

val env = StreamExecutionEnvironment.getExecutionEnvironment

val kinesis = env.addSource(new FlinkKinesisConsumer[String](
    "kinesis_stream_name", new SimpleStringSchema, consumerConfig))

The above is a simple example of using the consumer. Configuration for the consumer is supplied with a java.util.Properties instance, the configuration keys for which can be found in AWSConfigConstants (AWS-specific parameters) and ConsumerConfigConstants (Kinesis consumer parameters). The example demonstrates consuming a single Kinesis stream in the AWS region “us-east-1”. The AWS credentials are supplied using the basic method in which the AWS access key ID and secret access key are directly supplied in the configuration. Also, data is being consumed from the newest position in the Kinesis stream (the other option will be setting ConsumerConfigConstants.STREAM_INITIAL_POSITION to TRIM_HORIZON, which lets the consumer start reading the Kinesis stream from the earliest record possible).

Other optional configuration keys for the consumer can be found in ConsumerConfigConstants.

Note that the configured parallelism of the Flink Kinesis Consumer source can be completely independent of the total number of shards in the Kinesis streams. When the number of shards is larger than the parallelism of the consumer, then each consumer subtask can subscribe to multiple shards; otherwise if the number of shards is smaller than the parallelism of the consumer, then some consumer subtasks will simply be idle and wait until it gets assigned new shards (i.e., when the streams are resharded to increase the number of shards for higher provisioned Kinesis service throughput).

Also note that the assignment of shards to subtasks may not be optimal when shard IDs are not consecutive (as result of dynamic re-sharding in Kinesis). For cases where skew in the assignment leads to significant imbalanced consumption, a custom implementation of KinesisShardAssigner can be set on the consumer.

Configuring Starting Position

The Flink Kinesis Consumer currently provides the following options to configure where to start reading Kinesis streams, simply by setting ConsumerConfigConstants.STREAM_INITIAL_POSITION to one of the following values in the provided configuration properties (the naming of the options identically follows the namings used by the AWS Kinesis Streams service):

• LATEST: read all shards of all streams starting from the latest record.
• TRIM_HORIZON: read all shards of all streams starting from the earliest record possible (data may be trimmed by Kinesis depending on the retention settings).
• AT_TIMESTAMP: read all shards of all streams starting from a specified timestamp. The timestamp must also be specified in the configuration properties by providing a value for ConsumerConfigConstants.STREAM_INITIAL_TIMESTAMP, in one of the following date pattern :
  • a non-negative double value representing the number of seconds that has elapsed since the Unix epoch (for example, 1459799926.480).
  • a user defined pattern, which is a valid pattern for SimpleDateFormat provided by ConsumerConfigConstants.STREAM_TIMESTAMP_DATE_FORMAT. If ConsumerConfigConstants.STREAM_TIMESTAMP_DATE_FORMAT is not defined then the default pattern will be yyyy-MM-dd'T'HH:mm:ss.SSSXXX (for example, timestamp value is 2016-04-04 and pattern is yyyy-MM-dd given by user or timestamp value is 2016-04-04T19:58:46.480-00:00 without given a pattern).

Fault Tolerance for Exactly-Once User-Defined State Update Semantics

With Flink’s checkpointing enabled, the Flink Kinesis Consumer will consume records from shards in Kinesis streams and periodically checkpoint each shard’s progress. In case of a job failure, Flink will restore the streaming program to the state of the latest complete checkpoint and re-consume the records from Kinesis shards, starting from the progress that was stored in the checkpoint.

The interval of drawing checkpoints therefore defines how much the program may have to go back at most, in case of a failure.

To use fault tolerant Kinesis Consumers, checkpointing of the topology needs to be enabled at the execution environment:

final StreamExecutionEnvironment env = StreamExecutionEnvironment.getExecutionEnvironment();
env.enableCheckpointing(5000); // checkpoint every 5000 msecs

val env = StreamExecutionEnvironment.getExecutionEnvironment()
env.enableCheckpointing(5000) // checkpoint every 5000 msecs

Also note that Flink can only restart the topology if enough processing slots are available to restart the topology. Therefore, if the topology fails due to loss of a TaskManager, there must still be enough slots available afterwards. Flink on YARN supports automatic restart of lost YARN containers.

Using Enhanced Fan-Out

Enhanced Fan-Out (EFO) increases the maximum number of concurrent consumers per Kinesis stream. Without EFO, all concurrent consumers share a single read quota per shard. Using EFO, each consumer gets a distinct dedicated read quota per shard, allowing read throughput to scale with the number of consumers. Using EFO will incur additional cost.

In order to enable EFO two additional configuration parameters are required:

• RECORD_PUBLISHER_TYPE: Determines whether to use EFO or POLLING. The default RecordPublisher is POLLING.
• EFO_CONSUMER_NAME: A name to identify the consumer. For a given Kinesis data stream, each consumer must have a unique name. However, consumer names do not have to be unique across data streams. Reusing a consumer name will result in existing subscriptions being terminated.

The code snippet below shows a simple example configurating an EFO consumer.

Properties consumerConfig = new Properties();
consumerConfig.put(AWSConfigConstants.AWS_REGION, "us-east-1");
consumerConfig.put(ConsumerConfigConstants.STREAM_INITIAL_POSITION, "LATEST");

consumerConfig.put(ConsumerConfigConstants.RECORD_PUBLISHER_TYPE, 
    ConsumerConfigConstants.RecordPublisherType.EFO.name());
consumerConfig.put(ConsumerConfigConstants.EFO_CONSUMER_NAME, "my-flink-efo-consumer");

StreamExecutionEnvironment env = StreamExecutionEnvironment.getExecutionEnvironment();

DataStream<String> kinesis = env.addSource(new FlinkKinesisConsumer<>(
    "kinesis_stream_name", new SimpleStringSchema(), consumerConfig));

val consumerConfig = new Properties()
consumerConfig.put(AWSConfigConstants.AWS_REGION, "us-east-1")
consumerConfig.put(ConsumerConfigConstants.STREAM_INITIAL_POSITION, "LATEST")

consumerConfig.put(ConsumerConfigConstants.RECORD_PUBLISHER_TYPE, 
    ConsumerConfigConstants.RecordPublisherType.EFO.name());
consumerConfig.put(ConsumerConfigConstants.EFO_CONSUMER_NAME, "my-flink-efo-consumer");

val env = StreamExecutionEnvironment.getExecutionEnvironment()

val kinesis = env.addSource(new FlinkKinesisConsumer[String](
    "kinesis_stream_name", new SimpleStringSchema, consumerConfig))

EFO Stream Consumer Registration/Deregistration

In order to use EFO, a stream consumer must be registered against each stream you wish to consume. By default, the FlinkKinesisConsumer will register the stream consumer automatically when the Flink job starts. The stream consumer will be registered using the name provided by the EFO_CONSUMER_NAME configuration. FlinkKinesisConsumer provides three registration strategies:

• Registration
  • LAZY (default): Stream consumers are registered when the Flink job starts running. If the stream consumer already exists, it will be reused. This is the preferred strategy for the majority of applications. However, jobs with parallelism greater than 1 will result in tasks competing to register and acquire the stream consumer ARN. For jobs with very large parallelism this can result in an increased start-up time. The describe operation has a limit of 20 transactions per second, this means application startup time will increase by roughly parallelism/20 seconds.
  • EAGER: Stream consumers are registered in the FlinkKinesisConsumer constructor. If the stream consumer already exists, it will be reused. This will result in registration occurring when the job is constructed, either on the Flink Job Manager or client environment submitting the job. Using this strategy results in a single thread registering and retrieving the stream consumer ARN, reducing startup time over LAZY (with large parallelism). However, consider that the client environment will require access to the AWS services.
  • NONE: Stream consumer registration is not performed by FlinkKinesisConsumer. Registration must be performed externally using the AWS CLI or SDK to invoke RegisterStreamConsumer. Stream consumer ARNs should be provided to the job via the consumer configuration.
• Deregistration
  • LAZY|EAGER (default): Stream consumers are deregistered when the job is shutdown gracefully. In the event that a job terminates within executing the shutdown hooks, stream consumers will remain active. In this situation the stream consumers will be gracefully reused when the application restarts.
  • NONE: Stream consumer deregistration is not performed by FlinkKinesisConsumer.

Below is an example configuration to use the EAGER registration strategy:

Properties consumerConfig = new Properties();
consumerConfig.put(AWSConfigConstants.AWS_REGION, "us-east-1");
consumerConfig.put(ConsumerConfigConstants.STREAM_INITIAL_POSITION, "LATEST");

consumerConfig.put(ConsumerConfigConstants.RECORD_PUBLISHER_TYPE, 
    ConsumerConfigConstants.RecordPublisherType.EFO.name());
consumerConfig.put(ConsumerConfigConstants.EFO_CONSUMER_NAME, "my-flink-efo-consumer");

consumerConfig.put(ConsumerConfigConstants.EFO_REGISTRATION_TYPE, 
    ConsumerConfigConstants.EFORegistrationType.EAGER.name());

StreamExecutionEnvironment env = StreamExecutionEnvironment.getExecutionEnvironment();

DataStream<String> kinesis = env.addSource(new FlinkKinesisConsumer<>(
    "kinesis_stream_name", new SimpleStringSchema(), consumerConfig));

val consumerConfig = new Properties()
consumerConfig.put(AWSConfigConstants.AWS_REGION, "us-east-1")
consumerConfig.put(ConsumerConfigConstants.STREAM_INITIAL_POSITION, "LATEST")

consumerConfig.put(ConsumerConfigConstants.RECORD_PUBLISHER_TYPE, 
    ConsumerConfigConstants.RecordPublisherType.EFO.name());
consumerConfig.put(ConsumerConfigConstants.EFO_CONSUMER_NAME, "my-flink-efo-consumer");

consumerConfig.put(ConsumerConfigConstants.EFO_REGISTRATION_TYPE, 
    ConsumerConfigConstants.EFORegistrationType.EAGER.name());

val env = StreamExecutionEnvironment.getExecutionEnvironment()

val kinesis = env.addSource(new FlinkKinesisConsumer[String](
    "kinesis_stream_name", new SimpleStringSchema, consumerConfig))

Below is an example configuration to use the NONE registration strategy:

Properties consumerConfig = new Properties();
consumerConfig.put(AWSConfigConstants.AWS_REGION, "us-east-1");
consumerConfig.put(ConsumerConfigConstants.STREAM_INITIAL_POSITION, "LATEST");

consumerConfig.put(ConsumerConfigConstants.RECORD_PUBLISHER_TYPE, 
    ConsumerConfigConstants.RecordPublisherType.EFO.name());
consumerConfig.put(ConsumerConfigConstants.EFO_CONSUMER_NAME, "my-flink-efo-consumer");

consumerConfig.put(ConsumerConfigConstants.EFO_REGISTRATION_TYPE, 
    ConsumerConfigConstants.EFORegistrationType.NONE.name());
consumerConfig.put(ConsumerConfigConstants.efoConsumerArn("stream-name"), 
    "arn:aws:kinesis:<region>:<account>>:stream/<stream-name>/consumer/<consumer-name>:<create-timestamp>");

StreamExecutionEnvironment env = StreamExecutionEnvironment.getExecutionEnvironment();

DataStream<String> kinesis = env.addSource(new FlinkKinesisConsumer<>(
    "kinesis_stream_name", new SimpleStringSchema(), consumerConfig));

val consumerConfig = new Properties()
consumerConfig.put(AWSConfigConstants.AWS_REGION, "us-east-1")
consumerConfig.put(ConsumerConfigConstants.STREAM_INITIAL_POSITION, "LATEST")

consumerConfig.put(ConsumerConfigConstants.RECORD_PUBLISHER_TYPE, 
    ConsumerConfigConstants.RecordPublisherType.EFO.name());
consumerConfig.put(ConsumerConfigConstants.EFO_CONSUMER_NAME, "my-flink-efo-consumer");

consumerConfig.put(ConsumerConfigConstants.EFO_REGISTRATION_TYPE, 
    ConsumerConfigConstants.EFORegistrationType.NONE.name());
consumerConfig.put(ConsumerConfigConstants.efoConsumerArn("stream-name"), 
    "arn:aws:kinesis:<region>:<account>>:stream/<stream-name>/consumer/<consumer-name>:<create-timestamp>");

val env = StreamExecutionEnvironment.getExecutionEnvironment()

val kinesis = env.addSource(new FlinkKinesisConsumer[String](
    "kinesis_stream_name", new SimpleStringSchema, consumerConfig))

Event Time for Consumed Records

If streaming topologies choose to use the event time notion for record timestamps, an approximate arrival timestamp will be used by default. This timestamp is attached to records by Kinesis once they were successfully received and stored by streams. Note that this timestamp is typically referred to as a Kinesis server-side timestamp, and there are no guarantees about the accuracy or order correctness (i.e., the timestamps may not always be ascending).

Users can choose to override this default with a custom timestamp, as described here, or use one from the predefined ones. After doing so, it can be passed to the consumer in the following way:

FlinkKinesisConsumer<String> consumer = new FlinkKinesisConsumer<>(
    "kinesis_stream_name",
    new SimpleStringSchema(),
    kinesisConsumerConfig);
consumer.setPeriodicWatermarkAssigner(new CustomAssignerWithPeriodicWatermarks());
DataStream<String> stream = env
	.addSource(consumer)
	.print();

val consumer = new FlinkKinesisConsumer[String](
    "kinesis_stream_name",
    new SimpleStringSchema(),
    kinesisConsumerConfig);
consumer.setPeriodicWatermarkAssigner(new CustomAssignerWithPeriodicWatermarks());
val stream = env
	.addSource(consumer)
	.print();

Internally, an instance of the assigner is executed per shard / consumer thread (see threading model below). When an assigner is specified, for each record read from Kinesis, the extractTimestamp(T element, long previousElementTimestamp) is called to assign a timestamp to the record and getCurrentWatermark() to determine the new watermark for the shard. The watermark of the consumer subtask is then determined as the minimum watermark of all its shards and emitted periodically. The per shard watermark is essential to deal with varying consumption speed between shards, that otherwise could lead to issues with downstream logic that relies on the watermark, such as incorrect late data dropping.

By default, the watermark is going to stall if shards do not deliver new records. The property ConsumerConfigConstants.SHARD_IDLE_INTERVAL_MILLIS can be used to avoid this potential issue through a timeout that will allow the watermark to progress despite of idle shards.

Event Time Alignment for Shard Consumers

The Flink Kinesis Consumer optionally supports synchronization between parallel consumer subtasks (and their threads) to avoid the event time skew related problems described in Event time synchronization across sources.

To enable synchronization, set the watermark tracker on the consumer:

JobManagerWatermarkTracker watermarkTracker =
    new JobManagerWatermarkTracker("myKinesisSource");
consumer.setWatermarkTracker(watermarkTracker);

The JobManagerWatermarkTracker will use a global aggregate to synchronize the per subtask watermarks. Each subtask uses a per shard queue to control the rate at which records are emitted downstream based on how far ahead of the global watermark the next record in the queue is.

The “emit ahead” limit is configured via ConsumerConfigConstants.WATERMARK_LOOKAHEAD_MILLIS. Smaller values reduce the skew but also the throughput. Larger values will allow the subtask to proceed further before waiting for the global watermark to advance.

Another variable in the throughput equation is how frequently the watermark is propagated by the tracker. The interval can be configured via ConsumerConfigConstants.WATERMARK_SYNC_MILLIS. Smaller values reduce emitter waits and come at the cost of increased communication with the job manager.

Since records accumulate in the queues when skew occurs, increased memory consumption needs to be expected. How much depends on the average record size. With larger sizes, it may be necessary to adjust the emitter queue capacity via ConsumerConfigConstants.WATERMARK_SYNC_QUEUE_CAPACITY.

Threading Model

The Flink Kinesis Consumer uses multiple threads for shard discovery and data consumption.

Shard Discovery

For shard discovery, each parallel consumer subtask will have a single thread that constantly queries Kinesis for shard information even if the subtask initially did not have shards to read from when the consumer was started. In other words, if the consumer is run with a parallelism of 10, there will be a total of 10 threads constantly querying Kinesis regardless of the total amount of shards in the subscribed streams.

Polling (default) Record Publisher

For POLLING data consumption, a single thread will be created to consume each discovered shard. Threads will terminate when the shard it is responsible of consuming is closed as a result of stream resharding. In other words, there will always be one thread per open shard.

Enhanced Fan-Out Record Publisher

For EFO data consumption the threading model is the same as POLLING, with additional thread pools to handle asynchronous communication with Kinesis. AWS SDK v2.x KinesisAsyncClient uses additional threads for Netty to handle IO and asynchronous response. Each parallel consumer subtask will have their own instance of the KinesisAsyncClient. In other words, if the consumer is run with a parallelism of 10, there will be a total of 10 KinesisAsyncClient instances. A separate client will be created and subsequently destroyed when registering and deregistering stream consumers.

Internally Used Kinesis APIs

The Flink Kinesis Consumer uses the AWS Java SDK internally to call Kinesis APIs for shard discovery and data consumption. Due to Amazon’s service limits for Kinesis Streams on the APIs, the consumer will be competing with other non-Flink consuming applications that the user may be running. Below is a list of APIs called by the consumer with description of how the consumer uses the API, as well as information on how to deal with any errors or warnings that the Flink Kinesis Consumer may have due to these service limits.

Shard Discovery

• ListShards: this is constantly called by a single thread in each parallel consumer subtask to discover any new shards as a result of stream resharding. By default, the consumer performs the shard discovery at an interval of 10 seconds, and will retry indefinitely until it gets a result from Kinesis. If this interferes with other non-Flink consuming applications, users can slow down the consumer of calling this API by setting a value for ConsumerConfigConstants.SHARD_DISCOVERY_INTERVAL_MILLIS in the supplied configuration properties. This sets the discovery interval to a different value. Note that this setting directly impacts the maximum delay of discovering a new shard and starting to consume it, as shards will not be discovered during the interval.

Polling (default) Record Publisher

• GetShardIterator: this is called only once when per shard consuming threads are started, and will retry if Kinesis complains that the transaction limit for the API has exceeded, up to a default of 3 attempts. Note that since the rate limit for this API is per shard (not per stream), the consumer itself should not exceed the limit. Usually, if this happens, users can either try to slow down any other non-Flink consuming applications of calling this API, or modify the retry behaviour of this API call in the consumer by setting keys prefixed by ConsumerConfigConstants.SHARD_GETITERATOR_* in the supplied configuration properties.

• GetRecords: this is constantly called by per shard consuming threads to fetch records from Kinesis. When a shard has multiple concurrent consumers (when there are any other non-Flink consuming applications running), the per shard rate limit may be exceeded. By default, on each call of this API, the consumer will retry if Kinesis complains that the data size / transaction limit for the API has exceeded, up to a default of 3 attempts. Users can either try to slow down other non-Flink consuming applications, or adjust the throughput of the consumer by setting the ConsumerConfigConstants.SHARD_GETRECORDS_MAX and ConsumerConfigConstants.SHARD_GETRECORDS_INTERVAL_MILLIS keys in the supplied configuration properties. Setting the former adjusts the maximum number of records each consuming thread tries to fetch from shards on each call (default is 10,000), while the latter modifies the sleep interval between each fetch (default is 200). The retry behaviour of the consumer when calling this API can also be modified by using the other keys prefixed by ConsumerConfigConstants.SHARD_GETRECORDS_*.

Enhanced Fan-Out Record Publisher

• SubscribeToShard: this is called by per shard consuming threads to obtain shard subscriptions. A shard subscription is typically active for 5 minutes, but subscriptions will be reaquired if any recoverable errors are thrown. Once a subscription is acquired, the consumer will receive a stream of SubscribeToShardEventss. Retry and backoff parameters can be configured using the ConsumerConfigConstants.SUBSCRIBE_TO_SHARD_* keys.

• DescribeStreamSummary: this is called once per stream, during stream consumer registration. By default, the LAZY registration strategy will scale the number of calls by the job parallelism. EAGER will invoke this once per stream and NONE will not invoke this API. Retry and backoff parameters can be configured using the ConsumerConfigConstants.STREAM_DESCRIBE_* keys.

• DescribeStreamConsumer: this is called during stream consumer registration and deregistration. For each stream this service will be invoked periodically until the stream consumer is reported ACTIVE/not found for registration/deregistration. By default, the LAZY registration strategy will scale the number of calls by the job parallelism. EAGER will call the service once per stream for registration only. NONE will not invoke this service. Retry and backoff parameters can be configured using the ConsumerConfigConstants.DESCRIBE_STREAM_CONSUMER_* keys.

• RegisterStreamConsumer: this is called once per stream during stream consumer registration, unless the NONE registration strategy is configured. Retry and backoff parameters can be configured using the ConsumerConfigConstants.REGISTER_STREAM_* keys.

• DeregisterStreamConsumer: this is called once per stream during stream consumer deregistration, unless the NONE or EAGER registration strategy is configured. Retry and backoff parameters can be configured using the ConsumerConfigConstants.DEREGISTER_STREAM_* keys.

Kinesis Producer

The FlinkKinesisProducer uses Kinesis Producer Library (KPL) to put data from a Flink stream into a Kinesis stream.

Note that the producer is not participating in Flink’s checkpointing and doesn’t provide exactly-once processing guarantees. Also, the Kinesis producer does not guarantee that records are written in order to the shards (See here and here for more details).

In case of a failure or a resharding, data will be written again to Kinesis, leading to duplicates. This behavior is usually called “at-least-once” semantics.

To put data into a Kinesis stream, make sure the stream is marked as “ACTIVE” in the AWS dashboard.

For the monitoring to work, the user accessing the stream needs access to the CloudWatch service.

Properties producerConfig = new Properties();
// Required configs
producerConfig.put(AWSConfigConstants.AWS_REGION, "us-east-1");
producerConfig.put(AWSConfigConstants.AWS_ACCESS_KEY_ID, "aws_access_key_id");
producerConfig.put(AWSConfigConstants.AWS_SECRET_ACCESS_KEY, "aws_secret_access_key");
// Optional configs
producerConfig.put("AggregationMaxCount", "4294967295");
producerConfig.put("CollectionMaxCount", "1000");
producerConfig.put("RecordTtl", "30000");
producerConfig.put("RequestTimeout", "6000");
producerConfig.put("ThreadPoolSize", "15");

// Disable Aggregation if it's not supported by a consumer
// producerConfig.put("AggregationEnabled", "false");
// Switch KinesisProducer's threading model
// producerConfig.put("ThreadingModel", "PER_REQUEST");

FlinkKinesisProducer<String> kinesis = new FlinkKinesisProducer<>(new SimpleStringSchema(), producerConfig);
kinesis.setFailOnError(true);
kinesis.setDefaultStream("kinesis_stream_name");
kinesis.setDefaultPartition("0");

DataStream<String> simpleStringStream = ...;
simpleStringStream.addSink(kinesis);

val producerConfig = new Properties()
// Required configs
producerConfig.put(AWSConfigConstants.AWS_REGION, "us-east-1")
producerConfig.put(AWSConfigConstants.AWS_ACCESS_KEY_ID, "aws_access_key_id")
producerConfig.put(AWSConfigConstants.AWS_SECRET_ACCESS_KEY, "aws_secret_access_key")
// Optional KPL configs
producerConfig.put("AggregationMaxCount", "4294967295")
producerConfig.put("CollectionMaxCount", "1000")
producerConfig.put("RecordTtl", "30000")
producerConfig.put("RequestTimeout", "6000")
producerConfig.put("ThreadPoolSize", "15")

// Disable Aggregation if it's not supported by a consumer
// producerConfig.put("AggregationEnabled", "false")
// Switch KinesisProducer's threading model
// producerConfig.put("ThreadingModel", "PER_REQUEST")

val kinesis = new FlinkKinesisProducer[String](new SimpleStringSchema, producerConfig)
kinesis.setFailOnError(true)
kinesis.setDefaultStream("kinesis_stream_name")
kinesis.setDefaultPartition("0")

val simpleStringStream = ...
simpleStringStream.addSink(kinesis)

The above is a simple example of using the producer. To initialize FlinkKinesisProducer, users are required to pass in AWS_REGION, AWS_ACCESS_KEY_ID, and AWS_SECRET_ACCESS_KEY via a java.util.Properties instance. Users can also pass in KPL’s configurations as optional parameters to customize the KPL underlying FlinkKinesisProducer. The full list of KPL configs and explanations can be found here. The example demonstrates producing a single Kinesis stream in the AWS region “us-east-1”.

If users don’t specify any KPL configs and values, FlinkKinesisProducer will use default config values of KPL, except RateLimit. RateLimit limits the maximum allowed put rate for a shard, as a percentage of the backend limits. KPL’s default value is 150 but it makes KPL throw RateLimitExceededException too frequently and breaks Flink sink as a result. Thus FlinkKinesisProducer overrides KPL’s default value to 100.

Instead of a SerializationSchema, it also supports a KinesisSerializationSchema. The KinesisSerializationSchema allows to send the data to multiple streams. This is done using the KinesisSerializationSchema.getTargetStream(T element) method. Returning null there will instruct the producer to write the element to the default stream. Otherwise, the returned stream name is used.

Threading Model

Since Flink 1.4.0, FlinkKinesisProducer switches its default underlying KPL from a one-thread-per-request mode to a thread-pool mode. KPL in thread-pool mode uses a queue and thread pool to execute requests to Kinesis. This limits the number of threads that KPL’s native process may create, and therefore greatly lowers CPU utilization and improves efficiency. Thus, We highly recommend Flink users use thread-pool model. The default thread pool size is 10. Users can set the pool size in java.util.Properties instance with key ThreadPoolSize, as shown in the above example.

Users can still switch back to one-thread-per-request mode by setting a key-value pair of ThreadingModel and PER_REQUEST in java.util.Properties, as shown in the code commented out in above example.

Backpressure

By default, FlinkKinesisProducer does not backpressure. Instead, records that cannot be sent because of the rate restriction of 1 MB per second per shard are buffered in an unbounded queue and dropped when their RecordTtl expires.

To avoid data loss, you can enable backpressuring by restricting the size of the internal queue:

// 200 Bytes per record, 1 shard
kinesis.setQueueLimit(500);

The value for queueLimit depends on the expected record size. To choose a good value, consider that Kinesis is rate-limited to 1MB per second per shard. If less than one second’s worth of records is buffered, then the queue may not be able to operate at full capacity. With the default RecordMaxBufferedTime of 100ms, a queue size of 100kB per shard should be sufficient. The queueLimit can then be computed via

queue limit = (number of shards * queue size per shard) / record size

E.g. for 200Bytes per record and 8 shards, a queue limit of 4000 is a good starting point. If the queue size limits throughput (below 1MB per second per shard), try increasing the queue limit slightly.

Using Custom Kinesis Endpoints

It is sometimes desirable to have Flink operate as a consumer or producer against a Kinesis VPC endpoint or a non-AWS Kinesis endpoint such as Kinesalite; this is especially useful when performing functional testing of a Flink application. The AWS endpoint that would normally be inferred by the AWS region set in the Flink configuration must be overridden via a configuration property.

To override the AWS endpoint, set the AWSConfigConstants.AWS_ENDPOINT and AWSConfigConstants.AWS_REGION properties. The region will be used to sign the endpoint URL.

Properties producerConfig = new Properties();
producerConfig.put(AWSConfigConstants.AWS_REGION, "us-east-1");
producerConfig.put(AWSConfigConstants.AWS_ACCESS_KEY_ID, "aws_access_key_id");
producerConfig.put(AWSConfigConstants.AWS_SECRET_ACCESS_KEY, "aws_secret_access_key");
producerConfig.put(AWSConfigConstants.AWS_ENDPOINT, "http://localhost:4567");

val producerConfig = new Properties()
producerConfig.put(AWSConfigConstants.AWS_REGION, "us-east-1")
producerConfig.put(AWSConfigConstants.AWS_ACCESS_KEY_ID, "aws_access_key_id")
producerConfig.put(AWSConfigConstants.AWS_SECRET_ACCESS_KEY, "aws_secret_access_key")
producerConfig.put(AWSConfigConstants.AWS_ENDPOINT, "http://localhost:4567")

Back to top