This documentation is for an out-of-date version of Apache Flink. We recommend you use the latest stable version.
Every function and operator in Flink can be stateful (see working with state for details). Stateful functions store data across the processing of individual elements/events, making state a critical building block for any type of more elaborate operation.
In order to make state fault tolerant, Flink needs to checkpoint the state. Checkpoints allow Flink to recover state and positions in the streams to give the application the same semantics as a failure-free execution.
The documentation on streaming fault tolerance describes in detail the technique behind Flink’s streaming fault tolerance mechanism.
Flink’s checkpointing mechanism interacts with durable storage for streams and state. In general, it requires:
- A persistent (or durable) data source that can replay records for a certain amount of time. Examples for such sources are persistent messages queues (e.g., Apache Kafka, RabbitMQ, Amazon Kinesis, Google PubSub) or file systems (e.g., HDFS, S3, GFS, NFS, Ceph, …).
- A persistent storage for state, typically a distributed filesystem (e.g., HDFS, S3, GFS, NFS, Ceph, …)
Enabling and Configuring Checkpointing #
By default, checkpointing is disabled. To enable checkpointing, call
enableCheckpointing(n) on the
StreamExecutionEnvironment, where n is the checkpoint interval in milliseconds.
Other parameters for checkpointing include:
checkpoint storage: You can set the location where checkpoint snapshots are made durable. By default Flink will use the JobManager’s heap. For production deployments it is recomended to instead use a durable filesystem. See checkpoint storage for more details on the available options for job-wide and cluster-wide configuration.
exactly-once vs. at-least-once: You can optionally pass a mode to the
enableCheckpointing(n)method to choose between the two guarantee levels. Exactly-once is preferable for most applications. At-least-once may be relevant for certain super-low-latency (consistently few milliseconds) applications.
checkpoint timeout: The time after which a checkpoint-in-progress is aborted, if it did not complete by then.
minimum time between checkpoints: To make sure that the streaming application makes a certain amount of progress between checkpoints, one can define how much time needs to pass between checkpoints. If this value is set for example to 5000, the next checkpoint will be started no sooner than 5 seconds after the previous checkpoint completed, regardless of the checkpoint duration and the checkpoint interval. Note that this implies that the checkpoint interval will never be smaller than this parameter.
It is often easier to configure applications by defining the “time between checkpoints” than the checkpoint interval, because the “time between checkpoints” is not susceptible to the fact that checkpoints may sometimes take longer than on average (for example if the target storage system is temporarily slow).
Note that this value also implies that the number of concurrent checkpoints is one.
tolerable checkpoint failure number: This defines how many consecutive checkpoint failures will be tolerated, before the whole job is failed over. The default value is
0, which means no checkpoint failures will be tolerated, and the job will fail on first reported checkpoint failure.
number of concurrent checkpoints: By default, the system will not trigger another checkpoint while one is still in progress. This ensures that the topology does not spend too much time on checkpoints and not make progress with processing the streams. It is possible to allow for multiple overlapping checkpoints, which is interesting for pipelines that have a certain processing delay (for example because the functions call external services that need some time to respond) but that still want to do very frequent checkpoints (100s of milliseconds) to re-process very little upon failures.
This option cannot be used when a minimum time between checkpoints is defined.
externalized checkpoints: You can configure periodic checkpoints to be persisted externally. Externalized checkpoints write their meta data out to persistent storage and are not automatically cleaned up when the job fails. This way, you will have a checkpoint around to resume from if your job fails. There are more details in the deployment notes on externalized checkpoints.
prefer checkpoint for recovery: This determines if a job will fallback to latest checkpoint even when there are more recent savepoints available to potentially reduce recovery time.
unaligned checkpoints: You can enable unaligned checkpoints to greatly reduce checkpointing times under backpressure. Only works for exactly-once checkpoints and with number of concurrent checkpoints of 1.
StreamExecutionEnvironment env = StreamExecutionEnvironment.getExecutionEnvironment(); // start a checkpoint every 1000 ms env.enableCheckpointing(1000); // advanced options: // set mode to exactly-once (this is the default) env.getCheckpointConfig().setCheckpointingMode(CheckpointingMode.EXACTLY_ONCE); // make sure 500 ms of progress happen between checkpoints env.getCheckpointConfig().setMinPauseBetweenCheckpoints(500); // checkpoints have to complete within one minute, or are discarded env.getCheckpointConfig().setCheckpointTimeout(60000); // only two consecutive checkpoint failures are tolerated env.getCheckpointConfig().setTolerableCheckpointFailureNumber(2); // allow only one checkpoint to be in progress at the same time env.getCheckpointConfig().setMaxConcurrentCheckpoints(1); // enable externalized checkpoints which are retained // after job cancellation env.getCheckpointConfig().enableExternalizedCheckpoints( ExternalizedCheckpointCleanup.RETAIN_ON_CANCELLATION); // enables the experimental unaligned checkpoints env.getCheckpointConfig().enableUnalignedCheckpoints(); // sets the checkpoint storage where checkpoint snapshots will be written env.getCheckpointConfig().setCheckpointStorage("hdfs://my/checkpoint/dir")
val env = StreamExecutionEnvironment.getExecutionEnvironment() // start a checkpoint every 1000 ms env.enableCheckpointing(1000) // advanced options: // set mode to exactly-once (this is the default) env.getCheckpointConfig.setCheckpointingMode(CheckpointingMode.EXACTLY_ONCE) // make sure 500 ms of progress happen between checkpoints env.getCheckpointConfig.setMinPauseBetweenCheckpoints(500) // checkpoints have to complete within one minute, or are discarded env.getCheckpointConfig.setCheckpointTimeout(60000) // only two consecutive checkpoint failures are tolerated env.getCheckpointConfig().setTolerableCheckpointFailureNumber(2) // allow only one checkpoint to be in progress at the same time env.getCheckpointConfig.setMaxConcurrentCheckpoints(1) // enable externalized checkpoints which are retained // after job cancellation env.getCheckpointConfig().enableExternalizedCheckpoints( ExternalizedCheckpointCleanup.RETAIN_ON_CANCELLATION) // enables the experimental unaligned checkpoints env.getCheckpointConfig.enableUnalignedCheckpoints() // sets the checkpoint storage where checkpoint snapshots will be written env.getCheckpointConfig.setCheckpointStorage("hdfs://my/checkpoint/dir")
env = StreamExecutionEnvironment.get_execution_environment() # start a checkpoint every 1000 ms env.enable_checkpointing(1000) # advanced options: # set mode to exactly-once (this is the default) env.get_checkpoint_config().set_checkpointing_mode(CheckpointingMode.EXACTLY_ONCE) # make sure 500 ms of progress happen between checkpoints env.get_checkpoint_config().set_min_pause_between_checkpoints(500) # checkpoints have to complete within one minute, or are discarded env.get_checkpoint_config().set_checkpoint_timeout(60000) # only two consecutive checkpoint failures are tolerated env.get_checkpoint_config().set_tolerable_checkpoint_failure_number(2) # allow only one checkpoint to be in progress at the same time env.get_checkpoint_config().set_max_concurrent_checkpoints(1) # enable externalized checkpoints which are retained after job cancellation env.get_checkpoint_config().enable_externalized_checkpoints(ExternalizedCheckpointCleanup.RETAIN_ON_CANCELLATION) # allow job recovery fallback to checkpoint when there is a more recent savepoint env.get_checkpoint_config().set_prefer_checkpoint_for_recovery(True) # enables the experimental unaligned checkpoints env.get_checkpoint_config().enable_unaligned_checkpoints()
Related Config Options #
Some more parameters and/or defaults may be set via
conf/flink-conf.yaml (see configuration for a full guide):
|false||Boolean||Option whether the state backend should create incremental checkpoints, if possible. For an incremental checkpoint, only a diff from the previous checkpoint is stored, rather than the complete checkpoint state. Once enabled, the state size shown in web UI or fetched from rest API only represents the delta checkpoint size instead of full checkpoint size. Some state backends may not support incremental checkpoints and ignore this option.|
|false||Boolean||This option configures local recovery for this state backend. By default, local recovery is deactivated. Local recovery currently only covers keyed state backends. Currently, the MemoryStateBackend does not support local recovery and ignores this option.|
|(none)||String||The checkpoint storage implementation to be used to checkpoint state.
The implementation can be specified either via their shortcut name, or via the class name of a
Recognized shortcut names are 'jobmanager' and 'filesystem'.
|(none)||String||The default directory used for storing the data files and meta data of checkpoints in a Flink supported filesystem. The storage path must be accessible from all participating processes/nodes(i.e. all TaskManagers and JobManagers).|
|1||Integer||The maximum number of completed checkpoints to retain.|
|(none)||String||The default directory for savepoints. Used by the state backends that write savepoints to file systems (HashMapStateBackend, EmbeddedRocksDBStateBackend).|
|20 kb||MemorySize||The minimum size of state data files. All state chunks smaller than that are stored inline in the root checkpoint metadata file. The max memory threshold for this configuration is 1MB.|
|4096||Integer||The default size of the write buffer for the checkpoint streams that write to file systems. The actual write buffer size is determined to be the maximum of the value of this option and option 'state.storage.fs.memory-threshold'.|
|(none)||String||The config parameter defining the root directories for storing file-based state for local recovery. Local recovery currently only covers keyed state backends. Currently, MemoryStateBackend does not support local recovery and ignore this option|
Selecting Checkpoint Storage #
Flink’s checkpointing mechanism stores consistent snapshots of all the state in timers and stateful operators, including connectors, windows, and any user-defined state. Where the checkpoints are stored (e.g., JobManager memory, file system, database) depends on the configured Checkpoint Storage.
By default, checkpoints are stored in memory in the JobManager. For proper persistence of large state,
Flink supports various approaches for checkpointing state in other locations.
The choice of checkpoint storage can be configured via
It is strongly encouraged that checkpoints be stored in a highly-available filesystem for production deployments.
See checkpoint storage for more details on the available options for job-wide and cluster-wide configuration.
State Checkpoints in Iterative Jobs #
Flink currently only provides processing guarantees for jobs without iterations. Enabling checkpointing on an iterative job causes an exception. In order to force checkpointing on an iterative program the user needs to set a special flag when enabling checkpointing:
env.enableCheckpointing(interval, CheckpointingMode.EXACTLY_ONCE, force = true).
Please note that records in flight in the loop edges (and the state changes associated with them) will be lost during failure.