Command-Line Interface
Flink provides a Command-Line Interface (CLI) to run programs that are packaged
as JAR files, and control their execution. The CLI is part
of any Flink setup, available in local single node setups and in
distributed setups. It is located under <flink-home>/bin/flink
and connects by default to the running Flink master (JobManager) that was
started from the same installation directory.
The command line can be used to
- submit jobs for execution,
- cancel a running job,
- provide information about a job,
- list running and waiting jobs,
- trigger and dispose savepoints, and
A prerequisite to using the command line interface is that the Flink
master (JobManager) has been started (via
<flink-home>/bin/start-cluster.sh) or that a YARN environment is
available.
Examples
Job Submission Examples
These examples about how to submit a job in CLI.
-
Run example program with no arguments:
./bin/flink run ./examples/batch/WordCount.jar -
Run example program with arguments for input and result files:
./bin/flink run ./examples/batch/WordCount.jar \ --input file:///home/user/hamlet.txt --output file:///home/user/wordcount_out -
Run example program with parallelism 16 and arguments for input and result files:
./bin/flink run -p 16 ./examples/batch/WordCount.jar \ --input file:///home/user/hamlet.txt --output file:///home/user/wordcount_out -
Run example program with flink log output disabled:
./bin/flink run -q ./examples/batch/WordCount.jar -
Run example program in detached mode:
./bin/flink run -d ./examples/batch/WordCount.jar -
Run example program on a specific JobManager:
./bin/flink run -m myJMHost:8081 \ ./examples/batch/WordCount.jar \ --input file:///home/user/hamlet.txt --output file:///home/user/wordcount_out -
Run example program with a specific class as an entry point:
./bin/flink run -c org.apache.flink.examples.java.wordcount.WordCount \ ./examples/batch/WordCount.jar \ --input file:///home/user/hamlet.txt --output file:///home/user/wordcount_out -
Run example program using a per-job YARN cluster with 2 TaskManagers:
./bin/flink run -m yarn-cluster -yn 2 \ ./examples/batch/WordCount.jar \ --input hdfs:///user/hamlet.txt --output hdfs:///user/wordcount_out
-
Run Python Table program:
./bin/flink run -py examples/python/table/batch/word_count.py -
Run Python Table program with pyFiles:
./bin/flink run -py examples/python/table/batch/word_count.py \ -pyfs file:///user.txt,hdfs:///$namenode_address/username.txt -
Run Python Table program with pyFiles and pyModule:
./bin/flink run -pym batch.word_count -pyfs examples/python/table/batch -
Run Python Table program with parallelism 16:
./bin/flink run -p 16 -py examples/python/table/batch/word_count.py -
Run Python Table program with flink log output disabled:
./bin/flink run -q -py examples/python/table/batch/word_count.py -
Run Python Table program in detached mode:
./bin/flink run -d -py examples/python/table/batch/word_count.py -
Run Python Table program on a specific JobManager:
./bin/flink run -m myJMHost:8081 \ -py examples/python/table/batch/word_count.py -
Run Python Table program using a per-job YARN cluster with 2 TaskManagers:
./bin/flink run -m yarn-cluster -yn 2 \ -py examples/python/table/batch/word_count.py
Job Management Examples
These examples about how to manage a job in CLI.
-
Display the optimized execution plan for the WordCount example program as JSON:
./bin/flink info ./examples/batch/WordCount.jar \ --input file:///home/user/hamlet.txt --output file:///home/user/wordcount_out -
List scheduled and running jobs (including their JobIDs):
./bin/flink list -
List scheduled jobs (including their JobIDs):
./bin/flink list -s -
List running jobs (including their JobIDs):
./bin/flink list -r -
List all existing jobs (including their JobIDs):
./bin/flink list -a -
List running Flink jobs inside Flink YARN session:
./bin/flink list -m yarn-cluster -yid <yarnApplicationID> -r -
Cancel a job:
./bin/flink cancel <jobID> -
Cancel a job with a savepoint (deprecated; use “stop” instead):
./bin/flink cancel -s [targetDirectory] <jobID> -
Gracefully stop a job with a savepoint (streaming jobs only):
./bin/flink stop [-p targetDirectory] [-d] <jobID>
Savepoints
Savepoints are controlled via the command line client:
Trigger a Savepoint
./bin/flink savepoint <jobId> [savepointDirectory]This will trigger a savepoint for the job with ID jobId, and returns the path of the created savepoint. You need this path to restore and dispose savepoints.
Furthermore, you can optionally specify a target file system directory to store the savepoint in. The directory needs to be accessible by the JobManager.
If you don’t specify a target directory, you need to have configured a default directory. Otherwise, triggering the savepoint will fail.
Trigger a Savepoint with YARN
./bin/flink savepoint <jobId> [savepointDirectory] -yid <yarnAppId>This will trigger a savepoint for the job with ID jobId and YARN application ID yarnAppId, and returns the path of the created savepoint.
Everything else is the same as described in the above Trigger a Savepoint section.
Stop
Use the stop to gracefully stop a running streaming job with a savepoint.
./bin/flink stop [-p targetDirectory] [-d] <jobID>A “stop” call is a more graceful way of stopping a running streaming job, as the “stop” signal flows from
source to sink. When the user requests to stop a job, all sources will be requested to send the last checkpoint barrier
that will trigger a savepoint, and after the successful completion of that savepoint, they will finish by calling their
cancel() method. If the -d flag is specified, then a MAX_WATERMARK will be emitted before the last checkpoint
barrier. This will result all registered event-time timers to fire, thus flushing out any state that is waiting for
a specific watermark, e.g. windows. The job will keep running until all sources properly shut down. This allows the
job to finish processing all in-flight data.
Cancel with a savepoint (deprecated)
You can atomically trigger a savepoint and cancel a job.
./bin/flink cancel -s [savepointDirectory] <jobID>If no savepoint directory is configured, you need to configure a default savepoint directory for the Flink installation (see Savepoints).
The job will only be cancelled if the savepoint succeeds.
Note: Cancelling a job with savepoint is deprecated. Use "stop" instead.
Restore a savepoint
./bin/flink run -s <savepointPath> ...The run command has a savepoint flag to submit a job, which restores its state from a savepoint. The savepoint path is returned by the savepoint trigger command.
By default, we try to match all savepoint state to the job being submitted. If you want to allow to skip savepoint state that cannot be restored with the new job you can set the allowNonRestoredState flag. You need to allow this if you removed an operator from your program that was part of the program when the savepoint was triggered and you still want to use the savepoint.
./bin/flink run -s <savepointPath> -n ...This is useful if your program dropped an operator that was part of the savepoint.
Dispose a savepoint
./bin/flink savepoint -d <savepointPath>Disposes the savepoint at the given path. The savepoint path is returned by the savepoint trigger command.
If you use custom state instances (for example custom reducing state or RocksDB state), you have to specify the path to the program JAR with which the savepoint was triggered in order to dispose the savepoint with the user code class loader:
./bin/flink savepoint -d <savepointPath> -j <jarFile>Otherwise, you will run into a ClassNotFoundException.
Usage
The command line syntax is as follows:
./flink <ACTION> [OPTIONS] [ARGUMENTS]
The following actions are available:
Action "run" compiles and runs a program.
Syntax: run [OPTIONS] <jar-file> <arguments>
"run" action options:
-c,--class <classname> Class with the program entry point
("main()" method or "getPlan()" method).
Only needed if the JAR file does not
specify the class in its manifest.
-C,--classpath <url> Adds a URL to each user code
classloader on all nodes in the
cluster. The paths must specify a
protocol (e.g. file://) and be
accessible on all nodes (e.g. by means
of a NFS share). You can use this
option multiple times for specifying
more than one URL. The protocol must
be supported by the {@link
java.net.URLClassLoader}.
-d,--detached If present, runs the job in detached
mode
-n,--allowNonRestoredState Allow to skip savepoint state that
cannot be restored. You need to allow
this if you removed an operator from
your program that was part of the
program when the savepoint was
triggered.
-p,--parallelism <parallelism> The parallelism with which to run the
program. Optional flag to override the
default value specified in the
configuration.
-py,--python <python-file> Python script with the program entry
point.The dependent resources can be
configured with the `--pyFiles` option.
-pyfs,--pyFiles <python-files> Attach custom python files for job.
Comma can be used as the separator to
specify multiple files. The standard
python resource file suffixes such as
.py/.egg/.zip are all supported.
(eg:--pyFiles file:///tmp/myresource.zip
,hdfs:///$namenode_address/myresource2.zip)
-pym,--pyModule <python-module> Python module with the program entry
point. This option must be used in
conjunction with ` --pyFiles`.
-q,--sysoutLogging If present, suppress logging output to
standard out.
-s,--fromSavepoint <savepointPath> Path to a savepoint to restore the job
from (for example
hdfs:///flink/savepoint-1537).
-sae,--shutdownOnAttachedExit If the job is submitted in attached
mode, perform a best-effort cluster
shutdown when the CLI is terminated
abruptly, e.g., in response to a user
interrupt, such as typing Ctrl + C.
Options for yarn-cluster mode:
-d,--detached If present, runs the job in detached
mode
-m,--jobmanager <arg> Address of the JobManager (master) to
which to connect. Use this flag to
connect to a different JobManager than
the one specified in the
configuration.
-sae,--shutdownOnAttachedExit If the job is submitted in attached
mode, perform a best-effort cluster
shutdown when the CLI is terminated
abruptly, e.g., in response to a user
interrupt, such as typing Ctrl + C.
-yat,--yarnapplicationType <arg> Set a custom application type for the
application on YARN
-yD <property=value> use value for given property
-yd,--yarndetached If present, runs the job in detached
mode (deprecated; use non-YARN
specific option instead)
-yh,--yarnhelp Help for the Yarn session CLI.
-yid,--yarnapplicationId <arg> Attach to running YARN session
-yj,--yarnjar <arg> Path to Flink jar file
-yjm,--yarnjobManagerMemory <arg> Memory for JobManager Container
with optional unit (default: MB)
-yn,--yarncontainer <arg> Number of YARN container to allocate
(=Number of Task Managers)
-ynm,--yarnname <arg> Set a custom name for the application
on YARN
-yq,--yarnquery Display available YARN resources
(memory, cores)
-yqu,--yarnqueue <arg> Specify YARN queue.
-ys,--yarnslots <arg> Number of slots per TaskManager
-yst,--yarnstreaming Start Flink in streaming mode
-yt,--yarnship <arg> Ship files in the specified directory
(t for transfer), multiple options are
supported.
-ytm,--yarntaskManagerMemory <arg> Memory per TaskManager Container
with optional unit (default: MB)
-yz,--yarnzookeeperNamespace <arg> Namespace to create the Zookeeper
sub-paths for high availability mode
-ynl,--yarnnodeLabel <arg> Specify YARN node label for
the YARN application
-z,--zookeeperNamespace <arg> Namespace to create the Zookeeper
sub-paths for high availability mode
Options for default mode:
-m,--jobmanager <arg> Address of the JobManager (master) to which
to connect. Use this flag to connect to a
different JobManager than the one specified
in the configuration.
-z,--zookeeperNamespace <arg> Namespace to create the Zookeeper sub-paths
for high availability mode
Action "info" shows the optimized execution plan of the program (JSON).
Syntax: info [OPTIONS] <jar-file> <arguments>
"info" action options:
-c,--class <classname> Class with the program entry point ("main()"
method or "getPlan()" method). Only needed
if the JAR file does not specify the class
in its manifest.
-p,--parallelism <parallelism> The parallelism with which to run the
program. Optional flag to override the
default value specified in the
configuration.
Action "list" lists running and scheduled programs.
Syntax: list [OPTIONS]
"list" action options:
-r,--running Show only running programs and their JobIDs
-s,--scheduled Show only scheduled programs and their JobIDs
Options for yarn-cluster mode:
-m,--jobmanager <arg> Address of the JobManager (master) to
which to connect. Use this flag to connect
to a different JobManager than the one
specified in the configuration.
-yid,--yarnapplicationId <arg> Attach to running YARN session
-z,--zookeeperNamespace <arg> Namespace to create the Zookeeper
sub-paths for high availability mode
Options for default mode:
-m,--jobmanager <arg> Address of the JobManager (master) to which
to connect. Use this flag to connect to a
different JobManager than the one specified
in the configuration.
-z,--zookeeperNamespace <arg> Namespace to create the Zookeeper sub-paths
for high availability mode
Action "stop" stops a running program with a savepoint (streaming jobs only).
Syntax: stop [OPTIONS] <Job ID>
"stop" action options:
-d,--drain Send MAX_WATERMARK before taking the
savepoint and stopping the pipelne.
-p,--savepointPath <savepointPath> Path to the savepoint (for example
hdfs:///flink/savepoint-1537). If no
directory is specified, the configured
default will be used
("state.savepoints.dir").
Options for yarn-cluster mode:
-m,--jobmanager <arg> Address of the JobManager (master) to
which to connect. Use this flag to connect
to a different JobManager than the one
specified in the configuration.
-yid,--yarnapplicationId <arg> Attach to running YARN session
-z,--zookeeperNamespace <arg> Namespace to create the Zookeeper
sub-paths for high availability mode
Options for default mode:
-m,--jobmanager <arg> Address of the JobManager (master) to which
to connect. Use this flag to connect to a
different JobManager than the one specified
in the configuration.
-z,--zookeeperNamespace <arg> Namespace to create the Zookeeper sub-paths
for high availability mode
Action "cancel" cancels a running program.
Syntax: cancel [OPTIONS] <Job ID>
"cancel" action options:
-s,--withSavepoint <targetDirectory> **DEPRECATION WARNING**: Cancelling
a job with savepoint is deprecated.
Use "stop" instead.
Trigger savepoint and cancel job.
The target directory is optional. If
no directory is specified, the
configured default directory
(state.savepoints.dir) is used.
Options for yarn-cluster mode:
-m,--jobmanager <arg> Address of the JobManager (master) to
which to connect. Use this flag to connect
to a different JobManager than the one
specified in the configuration.
-yid,--yarnapplicationId <arg> Attach to running YARN session
-z,--zookeeperNamespace <arg> Namespace to create the Zookeeper
sub-paths for high availability mode
Options for default mode:
-m,--jobmanager <arg> Address of the JobManager (master) to which
to connect. Use this flag to connect to a
different JobManager than the one specified
in the configuration.
-z,--zookeeperNamespace <arg> Namespace to create the Zookeeper sub-paths
for high availability mode
Action "savepoint" triggers savepoints for a running job or disposes existing ones.
Syntax: savepoint [OPTIONS] <Job ID> [<target directory>]
"savepoint" action options:
-d,--dispose <arg> Path of savepoint to dispose.
-j,--jarfile <jarfile> Flink program JAR file.
Options for yarn-cluster mode:
-m,--jobmanager <arg> Address of the JobManager (master) to
which to connect. Use this flag to connect
to a different JobManager than the one
specified in the configuration.
-yid,--yarnapplicationId <arg> Attach to running YARN session
-z,--zookeeperNamespace <arg> Namespace to create the Zookeeper
sub-paths for high availability mode
Options for default mode:
-m,--jobmanager <arg> Address of the JobManager (master) to which
to connect. Use this flag to connect to a
different JobManager than the one specified
in the configuration.
-z,--zookeeperNamespace <arg> Namespace to create the Zookeeper sub-paths
for high availability mode