1. 部署与运维
2. 集群与部署
3. Docker

Docker 设置

Docker is a popular container runtime. There are Docker images for Apache Flink available on Docker Hub. You can use the docker images to deploy a Session or Job cluster in a containerized environment, e.g., standalone Kubernetes or native Kubernetes.

• Docker Hub Flink images
  • Image tags
• How to run a Flink image
  • Start a Session Cluster
  • Start a Job Cluster
• Customize Flink image
  • Configure options
  • Provide custom configuration
  • Using plugins
  • Advanced customization
• Flink with Docker Compose
  • Usage
  • Session Cluster with Docker Compose
  • Job Cluster with Docker Compose
• Flink with Docker Swarm
  • Session Cluster with Docker Swarm
  • Job Cluster with Docker Swarm

Docker Hub Flink images

The Flink Docker repository is hosted on Docker Hub and serves images of Flink version 1.2.1 and later.

Image tags

Images for each supported combination of Flink and Scala versions are available, and tag aliases are provided for convenience.

For example, you can use the following aliases:

• flink:latest → flink:<latest-flink>-scala_<latest-scala>
• flink:1.11 → flink:1.11.<latest-flink-1.11>-scala_2.11

NoteIt is recommended to always use an explicit version tag of the docker image that specifies both the needed Flink and Scala versions (for example flink:1.11-scala_2.12). This will avoid some class conflicts that can occur if the Flink and/or Scala versions used in the application are different from the versions provided by the docker image.

Note Prior to Flink 1.5 version, Hadoop dependencies were always bundled with Flink. You can see that certain tags include the version of Hadoop, e.g. (e.g. -hadoop28). Beginning with Flink 1.5, image tags that omit the Hadoop version correspond to Hadoop-free releases of Flink that do not include a bundled Hadoop distribution.

How to run a Flink image

The Flink image contains a regular Flink distribution with its default configuration and a standard entry point script. You can run its entry point in the following modes:

• JobManager for a Session cluster
• JobManager for a Job cluster
• TaskManager for any cluster

This allows you to deploy a standalone cluster (Session or Job) in any containerised environment, for example:

• manually in a local Docker setup,
• in a Kubernetes cluster,
• with Docker Compose,
• with Docker swarm.

Note The native Kubernetes also runs the same image by default and deploys TaskManagers on demand so that you do not have to do it manually.

The next chapters describe how to start a single Flink Docker container for various purposes.

Once you’ve started Flink on Docker, you can access the Flink Webfrontend on localhost:8081 or submit jobs like this ./bin/flink run ./examples/streaming/TopSpeedWindowing.jar.

We recommend using Docker Compose or Docker Swarm for deploying Flink as a Session Cluster to ease system configuration.

Start a Session Cluster

A Flink Session cluster can be used to run multiple jobs. Each job needs to be submitted to the cluster after it has been deployed. To deploy a Flink Session cluster with Docker, you need to start a JobManager container. To enable communication between the containers, we first set a required Flink configuration property and create a network:

FLINK_PROPERTIES="jobmanager.rpc.address: jobmanager"
docker network create flink-network

Then we launch the JobManager:

docker run \
    --rm \
    --name=jobmanager \
    --network flink-network \
    -p 8081:8081 \
    --env FLINK_PROPERTIES="${FLINK_PROPERTIES}" \
    flink:1.11.6-scala_2.11 jobmanager

and one or more TaskManager containers:

docker run \
    --rm \
    --name=taskmanager \
    --network flink-network \
    --env FLINK_PROPERTIES="${FLINK_PROPERTIES}" \
    flink:1.11.6-scala_2.11 taskmanager

Start a Job Cluster

A Flink Job cluster is a dedicated cluster which runs a single job. In this case, you deploy the cluster with the job as one step, thus, there is no extra job submission needed.

The job artifacts are included into the class path of Flink’s JVM process within the container and consist of:

• your job jar, which you would normally submit to a Session cluster and
• all other necessary dependencies or resources, not included into Flink.

To deploy a cluster for a single job with Docker, you need to

• make job artifacts available locally in all containers under /opt/flink/usrlib,
• start a JobManager container in the Job Cluster mode
• start the required number of TaskManager containers.

To make the job artifacts available locally in the container, you can

• either mount a volume (or multiple volumes) with the artifacts to /opt/flink/usrlib when you start the JobManager and TaskManagers:

    FLINK_PROPERTIES="jobmanager.rpc.address: jobmanager"
    docker network create flink-network
  
    docker run \
        --mount type=bind,src=/host/path/to/job/artifacts1,target=/opt/flink/usrlib/artifacts1 \
        --mount type=bind,src=/host/path/to/job/artifacts2,target=/opt/flink/usrlib/artifacts2 \
        --rm \
        --env FLINK_PROPERTIES="${FLINK_PROPERTIES}" \
        --name=jobmanager \
        --network flink-network \
        flink:1.11.6-scala_2.11 standalone-job \
        --job-classname com.job.ClassName \
        [--job-id <job id>] \
        [--fromSavepoint /path/to/savepoint [--allowNonRestoredState]] \
        [job arguments]
  
    docker run \
        --mount type=bind,src=/host/path/to/job/artifacts1,target=/opt/flink/usrlib/artifacts1 \
        --mount type=bind,src=/host/path/to/job/artifacts2,target=/opt/flink/usrlib/artifacts2 \
        --env FLINK_PROPERTIES="${FLINK_PROPERTIES}" \
        flink:1.11.6-scala_2.11 taskmanager
  

• or extend the Flink image by writing a custom Dockerfile, build it and use it for starting the JobManager and TaskManagers:

  Dockerfile:

    FROM flink
    ADD /host/path/to/job/artifacts/1 /opt/flink/usrlib/artifacts/1
    ADD /host/path/to/job/artifacts/2 /opt/flink/usrlib/artifacts/2
  

    docker build -t flink_with_job_artifacts .
    docker run \
        flink_with_job_artifacts standalone-job \
        --job-classname com.job.ClassName \
        [--job-id <job id>] \
        [--fromSavepoint /path/to/savepoint [--allowNonRestoredState]] \
        [job arguments]
  
    docker run flink_with_job_artifacts taskmanager
  

The standalone-job argument starts a JobManager container in the Job Cluster mode.

JobManager additional command line arguments

You can provide the following additional command line arguments to the cluster entrypoint:

• --job-classname <job class name>: Class name of the job to run.

  By default, Flink scans its class path for a JAR with a Main-Class or program-class manifest entry and chooses it as the job class. Use this command line argument to manually set the job class. This argument is required in case that no or more than one JAR with such a manifest entry is available on the class path.

• --job-id <job id> (optional): Manually set a Flink job ID for the job (default: 00000000000000000000000000000000)

• --fromSavepoint /path/to/savepoint (optional): Restore from a savepoint

  In order to resume from a savepoint, you also need to pass the savepoint path. Note that /path/to/savepoint needs to be accessible in all Docker containers of the cluster (e.g., storing it on a DFS or from the mounted volume or adding it to the image).

• --allowNonRestoredState (optional): Skip broken savepoint state

  Additionally you can specify this argument to allow that savepoint state is skipped which cannot be restored.

If the main function of the user job main class accepts arguments, you can also pass them at the end of the docker run command.

Customize Flink image

When you run the Flink containers, there may be a need to customize them. The next chapters describe some how-tos of what you can usually customize.

Configure options

When you run Flink image, you can also change its configuration options by setting the environment variable FLINK_PROPERTIES:

FLINK_PROPERTIES="jobmanager.rpc.address: host
taskmanager.numberOfTaskSlots: 3
blob.server.port: 6124
"
docker run --env FLINK_PROPERTIES=${FLINK_PROPERTIES} flink:1.11.6-scala_2.11 <jobmanager|standalone-job|taskmanager>

The jobmanager.rpc.address option must be configured, others are optional to set.

The environment variable FLINK_PROPERTIES should contain a list of Flink cluster configuration options separated by new line, the same way as in the flink-conf.yaml. FLINK_PROPERTIES takes precedence over configurations in flink-conf.yaml.

Provide custom configuration

The configuration files (flink-conf.yaml, logging, hosts etc) are located in the /opt/flink/conf directory in the Flink image. To provide a custom location for the Flink configuration files, you can

• either mount a volume with the custom configuration files to this path /opt/flink/conf when you run the Flink image:

    docker run \
        --mount type=bind,src=/host/path/to/custom/conf,target=/opt/flink/conf \
        flink:1.11.6-scala_2.11 <jobmanager|standalone-job|taskmanager>
  

• or add them to your custom Flink image, build and run it:

  Dockerfile:

    FROM flink
    ADD /host/path/to/flink-conf.yaml /opt/flink/conf/flink-conf.yaml
    ADD /host/path/to/log4j.properties /opt/flink/conf/log4j.properties
  

Warning! The mounted volume must contain all necessary configuration files. The flink-conf.yaml file must have write permission so that the Docker entry point script can modify it in certain cases.

Using plugins

As described in the plugins documentation page: in order to use plugins they must be copied to the correct location in the Flink installation in the Docker container for them to work.

If you want to enable plugins provided with Flink (in the opt/ directory of the Flink distribution), you can pass the environment variable ENABLE_BUILT_IN_PLUGINS when you run the Flink image. The ENABLE_BUILT_IN_PLUGINS should contain a list of plugin jar file names separated by ;. A valid plugin name is for example flink-s3-fs-hadoop-1.11.6.jar

    docker run \
        --env ENABLE_BUILT_IN_PLUGINS=flink-plugin1.jar;flink-plugin2.jar \
        flink:1.11.6-scala_2.11 <jobmanager|standalone-job|taskmanager>

There are also more advanced ways for customizing the Flink image.

Advanced customization

There are several ways in which you can further customize the Flink image:

• install custom software (e.g. python)
• enable (symlink) optional libraries or plugins from /opt/flink/opt into /opt/flink/lib or /opt/flink/plugins
• add other libraries to /opt/flink/lib (e.g. Hadoop)
• add other plugins to /opt/flink/plugins

See also: How to provide dependencies in the classpath.

You can customize the Flink image in several ways:

• override the container entry point with a custom script where you can run any bootstrap actions. At the end you can call the standard /docker-entrypoint.sh script of the Flink image with the same arguments as described in how to run the Flink image.

  The following example creates a custom entry point script which enables more libraries and plugins. The custom script, custom library and plugin are provided from a mounted volume. Then it runs the standard entry point script of the Flink image:

    # create custom_lib.jar
    # create custom_plugin.jar
  
    echo "
    ln -fs /opt/flink/opt/flink-queryable-state-runtime-*.jar /opt/flink/lib/.  # enable an optional library
    ln -fs /mnt/custom_lib.jar /opt/flink/lib/.  # enable a custom library
  
    mkdir -p /opt/flink/plugins/flink-s3-fs-hadoop
    ln -fs /opt/flink/opt/flink-s3-fs-hadoop-*.jar /opt/flink/plugins/flink-s3-fs-hadoop/.  # enable an optional plugin
  
    mkdir -p /opt/flink/plugins/custom_plugin
    ln -fs /mnt/custom_plugin.jar /opt/flink/plugins/custom_plugin/.  # enable a custom plugin
  
    /docker-entrypoint.sh <jobmanager|standalone-job|taskmanager>
    " > custom_entry_point_script.sh
  
    chmod 755 custom_entry_point_script.sh
  
    docker run \
        --mount type=bind,src=$(pwd),target=/mnt
        flink:1.11.6-scala_2.11 /mnt/custom_entry_point_script.sh
  

• extend the Flink image by writing a custom Dockerfile and build a custom image:

  Dockerfile:

    FROM flink
  
    RUN set -ex; apt-get update; apt-get -y install python
  
    ADD /host/path/to/flink-conf.yaml /container/local/path/to/custom/conf/flink-conf.yaml
    ADD /host/path/to/log4j.properties /container/local/path/to/custom/conf/log4j.properties
  
    RUN ln -fs /opt/flink/opt/flink-queryable-state-runtime-*.jar /opt/flink/lib/.
  
    RUN mkdir -p /opt/flink/plugins/flink-s3-fs-hadoop
    RUN ln -fs /opt/flink/opt/flink-s3-fs-hadoop-*.jar /opt/flink/plugins/flink-s3-fs-hadoop/.
  
    ENV VAR_NAME value
  

  Commands for building:

    docker build -t custom_flink_image .
    # optional push to your docker image registry if you have it,
    # e.g. to distribute the custom image to your cluster
    docker push custom_flink_image
  

Back to top

Flink with Docker Compose

Docker Compose is a way to run a group of Docker containers locally. The next chapters show examples of configuration files to run Flink.

Usage

• Create the yaml files with the container configuration, check examples for:
  • Session cluster
  • Job cluster

  See also the Flink Docker image tags and how to customize the Flink Docker image for usage in the configuration files.

• Launch a cluster in the foreground

    docker-compose up
  

• Launch a cluster in the background

    docker-compose up -d
  

• Scale the cluster up or down to N TaskManagers

    docker-compose scale taskmanager=<N>
  

• Access the JobManager container

    docker exec -it $(docker ps --filter name=jobmanager --format={{.ID}}) /bin/sh
  

• Kill the cluster

    docker-compose kill
  

• Access Web UI

  When the cluster is running, you can visit the web UI at http://localhost:8081. You can also use the web UI to submit a job to a Session cluster.

• To submit a job to a Session cluster via the command line, you can either

  • use Flink CLI on the host if it is installed:

    flink run -d -c ${JOB_CLASS_NAME} /job.jar
    

  • or copy the JAR to the JobManager container and submit the job using the CLI from there, for example:

    JOB_CLASS_NAME="com.job.ClassName"
    JM_CONTAINER=$(docker ps --filter name=jobmanager --format={{.ID}}))
    docker cp path/to/jar "${JM_CONTAINER}":/job.jar
    docker exec -t -i "${JM_CONTAINER}" flink run -d -c ${JOB_CLASS_NAME} /job.jar
    

Session Cluster with Docker Compose

docker-compose.yml:

version: "2.2"
services:
  jobmanager:
    image: flink:1.11.6-scala_2.11
    ports:
      - "8081:8081"
    command: jobmanager
    environment:
      - |
        FLINK_PROPERTIES=
        jobmanager.rpc.address: jobmanager

  taskmanager:
    image: flink:1.11.6-scala_2.11
    depends_on:
      - jobmanager
    command: taskmanager
    scale: 1
    environment:
      - |
        FLINK_PROPERTIES=
        jobmanager.rpc.address: jobmanager
        taskmanager.numberOfTaskSlots: 2

Job Cluster with Docker Compose

The artifacts must be available in the Flink containers, check details here. See also how to specify the JobManager arguments in the command for the jobmanager service.

docker-compose.yml:

version: "2.2"
services:
  jobmanager:
    image: flink:1.11.6-scala_2.11
    ports:
      - "8081:8081"
    command: standalone-job --job-classname com.job.ClassName [--job-id <job id>] [--fromSavepoint /path/to/savepoint [--allowNonRestoredState]] [job arguments]
    volumes:
      - /host/path/to/job/artifacts:/opt/flink/usrlib
    environment:
      - |
        FLINK_PROPERTIES=
        jobmanager.rpc.address: jobmanager
        parallelism.default: 2

  taskmanager:
    image: flink:1.11.6-scala_2.11
    depends_on:
      - jobmanager
    command: taskmanager
    scale: 1
    volumes:
      - /host/path/to/job/artifacts:/opt/flink/usrlib
    environment:
      - |
        FLINK_PROPERTIES=
        jobmanager.rpc.address: jobmanager
        taskmanager.numberOfTaskSlots: 2
        parallelism.default: 2

Back to top

Flink with Docker Swarm

The Docker swarm is a container orchestration tool, that allows you to manage multiple containers deployed across multiple host machines.

The following chapters contain examples of how to configure and start JobManager and TaskManager containers. You can adjust them accordingly to start a cluster. See also the Flink Docker image tags and how to customize the Flink Docker image for usage in the provided scripts.

The port 8081 is exposed for the Flink Web UI access. If you run the swarm locally, you can visit the web UI at http://localhost:8081 after starting the cluster.

Session Cluster with Docker Swarm

FLINK_PROPERTIES="jobmanager.rpc.address: flink-session-jobmanager
taskmanager.numberOfTaskSlots: 2
"

# Create overlay network
docker network create -d overlay flink-session

# Create the JobManager service
docker service create \
  --name flink-session-jobmanager \
  --env FLINK_PROPERTIES="${FLINK_PROPERTIES}" \
  -p 8081:8081 \
  --network flink-session \
  flink:1.11.6-scala_2.11 \
    jobmanager

# Create the TaskManager service (scale this out as needed)
docker service create \
  --name flink-session-taskmanager \
  --replicas 2 \
  --env FLINK_PROPERTIES="${FLINK_PROPERTIES}" \
  --network flink-session \
  flink:1.11.6-scala_2.11 \
    taskmanager

Job Cluster with Docker Swarm

FLINK_PROPERTIES="jobmanager.rpc.address: flink-jobmanager
taskmanager.numberOfTaskSlots: 2
"

# Create overlay network
docker network create -d overlay flink-job

# Create the JobManager service
docker service create \
  --name flink-jobmanager \
  --env FLINK_PROPERTIES="${FLINK_PROPERTIES}" \
  --mount type=bind,source=/host/path/to/job/artifacts,target=/opt/flink/usrlib \
  -p 8081:8081 \
  --network flink-job \
  flink:1.11.6-scala_2.11 \
    standalone-job \
    --job-classname com.job.ClassName \
    [--job-id <job id>] \
    [--fromSavepoint /path/to/savepoint [--allowNonRestoredState]] \
    [job arguments]

# Create the TaskManager service (scale this out as needed)
docker service create \
  --name flink-job-taskmanager \
  --replicas 2 \
  --env FLINK_PROPERTIES="${FLINK_PROPERTIES}" \
  --mount type=bind,source=/host/path/to/job/artifacts,target=/opt/flink/usrlib \
  --network flink-job \
  flink:1.11.6-scala_2.11 \
    taskmanager

The job artifacts must be available in the JobManager container, as outlined here. See also how to specify the JobManager arguments to pass them to the flink-jobmanager container.

The example assumes that you run the swarm locally and expects the job artifacts to be in /host/path/to/job/artifacts. It also mounts the host path with the artifacts as a volume to the container’s path /opt/flink/usrlib.

Back to top