StreamTask (Flink : 1.15-SNAPSHOT API)

java.lang.Object
- org.apache.flink.streaming.runtime.tasks.StreamTask<OUT,OP>

Type Parameters:

OUT -

OP -

All Implemented Interfaces:

CheckpointableTask, CoordinatedTask, TaskInvokable, AsyncExceptionHandler, ContainingTaskDetails

Direct Known Subclasses:

AbstractTwoInputStreamTask, MultipleInputStreamTask, OneInputStreamTask, SourceOperatorStreamTask, SourceStreamTask
```
@Internal
public abstract class StreamTask<OUT,OP extends StreamOperator<OUT>>
extends Object
implements TaskInvokable, CheckpointableTask, CoordinatedTask, AsyncExceptionHandler, ContainingTaskDetails
```
Base class for all streaming tasks. A task is the unit of local processing that is deployed and executed by the TaskManagers. Each task runs one or more StreamOperators which form the Task's operator chain. Operators that are chained together execute synchronously in the same thread and hence on the same stream partition. A common case for these chains are successive map/flatmap/filter tasks.
The task chain contains one "head" operator and multiple chained operators. The StreamTask is specialized for the type of the head operator: one-input and two-input tasks, as well as for sources, iteration heads and iteration tails.
The Task class deals with the setup of the streams read by the head operator, and the streams produced by the operators at the ends of the operator chain. Note that the chain may fork and thus have multiple ends.
The life cycle of the task is set up as follows:
```
 -- setInitialState -> provides state of all operators in the chain

 -- invoke()
       |
       +----> Create basic utils (config, etc) and load the chain of operators
       +----> operators.setup()
       +----> task specific init()
       +----> initialize-operator-states()
       +----> open-operators()
       +----> run()
       +----> finish-operators()
       +----> close-operators()
       +----> common cleanup
       +----> task specific cleanup()
 
```
The StreamTask has a lock object called lock. All calls to methods on a StreamOperator must be synchronized on this lock object to ensure that no methods are called concurrently.

Field Summary

Fields
Modifier and Type	Field and Description
`protected CheckpointStorage`	`checkpointStorage` Our checkpoint storage.
`protected StreamConfig`	`configuration` The configuration of this streaming task.
`protected StreamInputProcessor`	`inputProcessor` The input processor.
`protected static org.slf4j.Logger`	`LOG` The logger used by the StreamTask and its subclasses.
`protected MailboxProcessor`	`mailboxProcessor`
`protected OP`	`mainOperator` the main operator that consumes the input streams of this task.
`protected OperatorChain<OUT,OP>`	`operatorChain` The chain of operators executed by this task.
`protected StateBackend`	`stateBackend` Our state backend.
`protected TimerService`	`systemTimerService` In contrast to `timerService` we should not register any user timers here.
`protected TimerService`	`timerService` The internal `TimerService` used to define the current processing time (default = `System.currentTimeMillis()`) and register timers for tasks to be executed in the future.
`static ThreadGroup`	`TRIGGER_THREAD_GROUP` The thread group that holds all trigger timer threads.

Constructor Summary

Constructors
Modifier	Constructor and Description
`protected`	`StreamTask(Environment env)` Constructor for initialization, possibly with initial state (recovery / savepoint / etc).
`protected`	`StreamTask(Environment env, TimerService timerService)` Constructor for initialization, possibly with initial state (recovery / savepoint / etc).
`protected`	`StreamTask(Environment environment, TimerService timerService, Thread.UncaughtExceptionHandler uncaughtExceptionHandler)`
`protected`	`StreamTask(Environment environment, TimerService timerService, Thread.UncaughtExceptionHandler uncaughtExceptionHandler, StreamTaskActionExecutor actionExecutor)` Constructor for initialization, possibly with initial state (recovery / savepoint / etc).
`protected`	`StreamTask(Environment environment, TimerService timerService, Thread.UncaughtExceptionHandler uncaughtExceptionHandler, StreamTaskActionExecutor actionExecutor, TaskMailbox mailbox)`

Method Summary

All Methods Static Methods Instance Methods Abstract Methods Concrete Methods
Modifier and Type	Method and Description
`void`	`abortCheckpointOnBarrier(long checkpointId, CheckpointException cause)` Aborts a checkpoint as the result of receiving possibly some checkpoint barriers, but at least one `CancelCheckpointMarker`.
`protected void`	`advanceToEndOfEventTime()` Emits the `MAX_WATERMARK` so that all registered timers are fired.
`protected void`	`afterInvoke()`
`void`	`cancel()` This method is called when a task is canceled either as a result of a user abort or an execution failure.
`protected void`	`cancelTask()`
`void`	`cleanUp(Throwable throwable)` Cleanup any resources used in `TaskInvokable.invoke()` OR `TaskInvokable.restore()`.
`protected void`	`cleanUpInternal()`
`static <OUT> RecordWriterDelegate<SerializationDelegate<StreamRecord<OUT>>>`	`createRecordWriterDelegate(StreamConfig configuration, Environment environment)`
`StreamTaskStateInitializer`	`createStreamTaskStateInitializer()`
`protected void`	`declineCheckpoint(long checkpointId)`
`void`	`dispatchOperatorEvent(OperatorID operator, SerializedValue<OperatorEvent> event)`
`protected void`	`endData(StopMode mode)`
`protected void`	`finalize()` The finalize method shuts down the timer.
`protected long`	`getAsyncCheckpointStartDelayNanos()`
`ExecutorService`	`getAsyncOperationsThreadPool()`
`CloseableRegistry`	`getCancelables()`
`protected Optional<CheckpointBarrierHandler>`	`getCheckpointBarrierHandler()` Acquires the optional `CheckpointBarrierHandler` associated with this stream task.
`CheckpointStorageWorkerView`	`getCheckpointStorage()`
`protected CompletableFuture<Void>`	`getCompletionFuture()`
`StreamConfig`	`getConfiguration()`
`Environment`	`getEnvironment()`
`MailboxExecutorFactory`	`getMailboxExecutorFactory()`
`String`	`getName()` Gets the name of the task, in the form "taskname (2/5)".
`ProcessingTimeServiceFactory`	`getProcessingTimeServiceFactory()`
`void`	`handleAsyncException(String message, Throwable exception)` Handles an exception thrown by another thread (e.g.
`protected abstract void`	`init()`
`void`	`invoke()` Starts the execution.
`boolean`	`isCanceled()`
`boolean`	`isFailing()`
`boolean`	`isMailboxLoopRunning()`
`boolean`	`isRunning()`
`boolean`	`isUsingNonBlockingInput()`
`void`	`maybeInterruptOnCancel(Thread toInterrupt, String taskName, Long timeout)` Checks whether the task should be interrupted during cancellation and if so, execute the specified `Runnable interruptAction`.
`Future<Void>`	`notifyCheckpointAbortAsync(long checkpointId, long latestCompletedCheckpointId)` Invoked when a checkpoint has been aborted, i.e., when the checkpoint coordinator has received a decline message from one task and try to abort the targeted checkpoint by notification.
`Future<Void>`	`notifyCheckpointCompleteAsync(long checkpointId)` Invoked when a checkpoint has been completed, i.e., when the checkpoint coordinator has received the notification from all participating tasks.
`Future<Void>`	`notifyCheckpointSubsumedAsync(long checkpointId)` Invoked when a checkpoint has been subsumed, i.e., when the checkpoint coordinator has confirmed one checkpoint has been finished, and try to remove the first previous checkpoint.
`protected void`	`processInput(MailboxDefaultAction.Controller controller)` This method implements the default action of the task (e.g.
`void`	`restore()` This method can be called before `TaskInvokable.invoke()` to restore an invokable object for the last valid state, if it has it.
`void`	`runMailboxLoop()`
`boolean`	`runMailboxStep()`
`protected void`	`setSynchronousSavepoint(long checkpointId)`
`protected Counter`	`setupNumRecordsInCounter(StreamOperator streamOperator)`
`String`	`toString()`
`CompletableFuture<Boolean>`	`triggerCheckpointAsync(CheckpointMetaData checkpointMetaData, CheckpointOptions checkpointOptions)` This method is called to trigger a checkpoint, asynchronously by the checkpoint coordinator.
`void`	`triggerCheckpointOnBarrier(CheckpointMetaData checkpointMetaData, CheckpointOptions checkpointOptions, CheckpointMetricsBuilder checkpointMetrics)` This method is called when a checkpoint is triggered as a result of receiving checkpoint barriers on all input streams.

Methods inherited from class java.lang.Object
clone, equals, getClass, hashCode, notify, notifyAll, wait, wait, wait

Methods inherited from interface org.apache.flink.streaming.runtime.tasks.ContainingTaskDetails
getExecutionConfig, getIndexInSubtaskGroup, getJobConfiguration, getUserCodeClassLoader

- Field Detail
  - TRIGGER_THREAD_GROUP
```
public static final ThreadGroup TRIGGER_THREAD_GROUP
```
    The thread group that holds all trigger timer threads.
  - LOG
```
protected static final org.slf4j.Logger LOG
```
    The logger used by the StreamTask and its subclasses.
  - inputProcessor
```
@Nullable
protected StreamInputProcessor inputProcessor
```
    The input processor. Initialized in init() method.
  - mainOperator
```
protected OP extends StreamOperator<OUT> mainOperator
```
    the main operator that consumes the input streams of this task.
  - operatorChain
```
protected OperatorChain<OUT,OP extends StreamOperator<OUT>> operatorChain
```
    The chain of operators executed by this task.
  - configuration
```
protected final StreamConfig configuration
```
    The configuration of this streaming task.
  - stateBackend
```
protected final StateBackend stateBackend
```
    Our state backend. We use this to create a keyed state backend.
  - checkpointStorage
```
protected final CheckpointStorage checkpointStorage
```
    Our checkpoint storage. We use this to create checkpoint streams.
  - timerService
```
protected final TimerService timerService
```
    The internal TimerService used to define the current processing time (default = System.currentTimeMillis()) and register timers for tasks to be executed in the future.
  - systemTimerService
```
protected final TimerService systemTimerService
```
    In contrast to timerService we should not register any user timers here. It should be used only for system level timers.
  - mailboxProcessor
```
protected final MailboxProcessor mailboxProcessor
```
- Constructor Detail
  - StreamTask
```
protected StreamTask(Environment env)
              throws Exception
```
    Constructor for initialization, possibly with initial state (recovery / savepoint / etc).
    
    Parameters:
    
    env - The task environment for this task.
    
    Throws:
    
    Exception
  - StreamTask
```
protected StreamTask(Environment env,
                     @Nullable
                     TimerService timerService)
              throws Exception
```
    Constructor for initialization, possibly with initial state (recovery / savepoint / etc).
    
    Parameters:
    
    env - The task environment for this task.
    
    timerService - Optionally, a specific timer service to use.
    
    Throws:
    
    Exception
  - StreamTask
```
protected StreamTask(Environment environment,
                     @Nullable
                     TimerService timerService,
                     Thread.UncaughtExceptionHandler uncaughtExceptionHandler)
              throws Exception
```
    Throws:
    
    Exception
  - StreamTask
```
protected StreamTask(Environment environment,
                     @Nullable
                     TimerService timerService,
                     Thread.UncaughtExceptionHandler uncaughtExceptionHandler,
                     StreamTaskActionExecutor actionExecutor)
              throws Exception
```
    Constructor for initialization, possibly with initial state (recovery / savepoint / etc).
    This constructor accepts a special TimerService. By default (and if null is passes for the timer service) a DefaultTimerService will be used.
    
    Parameters:
    
    environment - The task environment for this task.
    
    timerService - Optionally, a specific timer service to use.
    
    uncaughtExceptionHandler - to handle uncaught exceptions in the async operations thread pool
    
    actionExecutor - a mean to wrap all actions performed by this task thread. Currently, only SynchronizedActionExecutor can be used to preserve locking semantics.
    
    Throws:
    
    Exception
  - StreamTask
```
protected StreamTask(Environment environment,
                     @Nullable
                     TimerService timerService,
                     Thread.UncaughtExceptionHandler uncaughtExceptionHandler,
                     StreamTaskActionExecutor actionExecutor,
                     TaskMailbox mailbox)
              throws Exception
```
    Throws:
    
    Exception
- Method Detail
  - init
```
protected abstract void init()
                      throws Exception
```
    Throws:
    
    Exception
  - cancelTask
```
protected void cancelTask()
                   throws Exception
```
    Throws:
    
    Exception
  - processInput
```
protected void processInput(MailboxDefaultAction.Controller controller)
                     throws Exception
```
    This method implements the default action of the task (e.g. processing one event from the input). Implementations should (in general) be non-blocking.
    
    Parameters:
    
    controller - controller object for collaborative interaction between the action and the stream task.
    
    Throws:
    
    Exception - on any problems in the action.
  - endData
```
protected void endData(StopMode mode)
                throws Exception
```
    Throws:
    
    Exception
  - setSynchronousSavepoint
```
protected void setSynchronousSavepoint(long checkpointId)
```
  - advanceToEndOfEventTime
```
protected void advanceToEndOfEventTime()
                                throws Exception
```
    Emits the MAX_WATERMARK so that all registered timers are fired.
    This is used by the source task when the job is TERMINATED. In the case, we want all the timers registered throughout the pipeline to fire and the related state (e.g. windows) to be flushed.
    For tasks other than the source task, this method does nothing.
    
    Throws:
    
    Exception
  - createStreamTaskStateInitializer
```
public StreamTaskStateInitializer createStreamTaskStateInitializer()
```
  - setupNumRecordsInCounter
```
protected Counter setupNumRecordsInCounter(StreamOperator streamOperator)
```
  - restore
```
public final void restore()
                   throws Exception
```
    Description copied from interface: TaskInvokable
    
    This method can be called before TaskInvokable.invoke() to restore an invokable object for the last valid state, if it has it.
    If TaskInvokable.invoke() is not called after this method for some reason (e.g. task cancellation); then all resources should be cleaned up by calling TaskInvokable.cleanUp(Throwable) ()} after the method returns.
    
    Specified by:
    
    restore in interface TaskInvokable
    
    Throws:
    
    Exception
  - invoke
```
public final void invoke()
                  throws Exception
```
    Description copied from interface: TaskInvokable
    
    Starts the execution.
    This method is called by the task manager when the actual execution of the task starts.
    All resources should be cleaned up by calling TaskInvokable.cleanUp(Throwable) ()} after the method returns.
    
    Specified by:
    
    invoke in interface TaskInvokable
    
    Throws:
    
    Exception
  - runMailboxStep
```
@VisibleForTesting
public boolean runMailboxStep()
                                          throws Exception
```
    Throws:
    
    Exception
  - isMailboxLoopRunning
```
@VisibleForTesting
public boolean isMailboxLoopRunning()
```
  - runMailboxLoop
```
public void runMailboxLoop()
                    throws Exception
```
    Throws:
    
    Exception
  - afterInvoke
```
protected void afterInvoke()
                    throws Exception
```
    Throws:
    
    Exception
  - cleanUp
```
public final void cleanUp(Throwable throwable)
                   throws Exception
```
    Description copied from interface: TaskInvokable
    
    Cleanup any resources used in TaskInvokable.invoke() OR TaskInvokable.restore(). This method must be called regardless whether the aforementioned calls succeeded or failed.
    
    Specified by:
    
    cleanUp in interface TaskInvokable
    
    Parameters:
    
    throwable - iff failure happened during the execution of TaskInvokable.restore() or TaskInvokable.invoke(), null otherwise.
    ATTENTION: CancelTaskException should not be treated as a failure.
    
    Throws:
    
    Exception
  - cleanUpInternal
```
protected void cleanUpInternal()
                        throws Exception
```
    Throws:
    
    Exception
  - getCompletionFuture
```
protected CompletableFuture<Void> getCompletionFuture()
```
  - cancel
```
public final void cancel()
                  throws Exception
```
    Description copied from interface: TaskInvokable
    
    This method is called when a task is canceled either as a result of a user abort or an execution failure. It can be overwritten to respond to shut down the user code properly.
    
    Specified by:
    
    cancel in interface TaskInvokable
    
    Throws:
    
    Exception
  - getMailboxExecutorFactory
```
public MailboxExecutorFactory getMailboxExecutorFactory()
```
  - isRunning
```
public final boolean isRunning()
```
  - isCanceled
```
public final boolean isCanceled()
```
  - isFailing
```
public final boolean isFailing()
```
  - finalize
```
protected void finalize()
                 throws Throwable
```
    The finalize method shuts down the timer. This is a fail-safe shutdown, in case the original shutdown method was never called.
    This should not be relied upon! It will cause shutdown to happen much later than if manual shutdown is attempted, and cause threads to linger for longer than needed.
    
    Overrides:
    
    finalize in class Object
    
    Throws:
    
    Throwable
  - getName
```
public final String getName()
```
    Gets the name of the task, in the form "taskname (2/5)".
    
    Returns:
    
    The name of the task.
  - getCheckpointStorage
```
public CheckpointStorageWorkerView getCheckpointStorage()
```
  - getConfiguration
```
public StreamConfig getConfiguration()
```
  - triggerCheckpointAsync
```
public CompletableFuture<Boolean> triggerCheckpointAsync(CheckpointMetaData checkpointMetaData,
                                                         CheckpointOptions checkpointOptions)
```
    Description copied from interface: CheckpointableTask
    
    This method is called to trigger a checkpoint, asynchronously by the checkpoint coordinator.
    This method is called for tasks that start the checkpoints by injecting the initial barriers, i.e., the source tasks. In contrast, checkpoints on downstream operators, which are the result of receiving checkpoint barriers, invoke the CheckpointableTask.triggerCheckpointOnBarrier(CheckpointMetaData, CheckpointOptions, CheckpointMetricsBuilder) method.
    
    Specified by:
    
    triggerCheckpointAsync in interface CheckpointableTask
    
    Parameters:
    
    checkpointMetaData - Meta data for about this checkpoint
    
    checkpointOptions - Options for performing this checkpoint
    
    Returns:
    
    future with value of false if the checkpoint was not carried out, true otherwise
  - getCheckpointBarrierHandler
```
protected Optional<CheckpointBarrierHandler> getCheckpointBarrierHandler()
```
    Acquires the optional CheckpointBarrierHandler associated with this stream task. The CheckpointBarrierHandler should exist if the task has data inputs and requires to align the barriers.
  - triggerCheckpointOnBarrier
```
public void triggerCheckpointOnBarrier(CheckpointMetaData checkpointMetaData,
                                       CheckpointOptions checkpointOptions,
                                       CheckpointMetricsBuilder checkpointMetrics)
                                throws IOException
```
    Description copied from interface: CheckpointableTask
    
    This method is called when a checkpoint is triggered as a result of receiving checkpoint barriers on all input streams.
    
    Specified by:
    
    triggerCheckpointOnBarrier in interface CheckpointableTask
    
    Parameters:
    
    checkpointMetaData - Meta data for about this checkpoint
    
    checkpointOptions - Options for performing this checkpoint
    
    checkpointMetrics - Metrics about this checkpoint
    
    Throws:
    
    IOException - Exceptions thrown as the result of triggering a checkpoint are forwarded.
  - abortCheckpointOnBarrier
```
public void abortCheckpointOnBarrier(long checkpointId,
                                     CheckpointException cause)
                              throws IOException
```
    Description copied from interface: CheckpointableTask
    
    Aborts a checkpoint as the result of receiving possibly some checkpoint barriers, but at least one CancelCheckpointMarker.
    This requires implementing tasks to forward a CancelCheckpointMarker to their outputs.
    
    Specified by:
    
    abortCheckpointOnBarrier in interface CheckpointableTask
    
    Parameters:
    
    checkpointId - The ID of the checkpoint to be aborted.
    
    cause - The reason why the checkpoint was aborted during alignment
    
    Throws:
    
    IOException
  - declineCheckpoint
```
protected void declineCheckpoint(long checkpointId)
```
  - getAsyncOperationsThreadPool
```
public final ExecutorService getAsyncOperationsThreadPool()
```
  - notifyCheckpointCompleteAsync
```
public Future<Void> notifyCheckpointCompleteAsync(long checkpointId)
```
    Description copied from interface: CheckpointableTask
    
    Invoked when a checkpoint has been completed, i.e., when the checkpoint coordinator has received the notification from all participating tasks.
    
    Specified by:
    
    notifyCheckpointCompleteAsync in interface CheckpointableTask
    
    Parameters:
    
    checkpointId - The ID of the checkpoint that is complete.
    
    Returns:
    
    future that completes when the notification has been processed by the task.
  - notifyCheckpointAbortAsync
```
public Future<Void> notifyCheckpointAbortAsync(long checkpointId,
                                               long latestCompletedCheckpointId)
```
    Description copied from interface: CheckpointableTask
    
    Invoked when a checkpoint has been aborted, i.e., when the checkpoint coordinator has received a decline message from one task and try to abort the targeted checkpoint by notification.
    
    Specified by:
    
    notifyCheckpointAbortAsync in interface CheckpointableTask
    
    Parameters:
    
    checkpointId - The ID of the checkpoint that is aborted.
    
    latestCompletedCheckpointId - The ID of the latest completed checkpoint.
    
    Returns:
    
    future that completes when the notification has been processed by the task.
  - notifyCheckpointSubsumedAsync
```
public Future<Void> notifyCheckpointSubsumedAsync(long checkpointId)
```
    Description copied from interface: CheckpointableTask
    
    Invoked when a checkpoint has been subsumed, i.e., when the checkpoint coordinator has confirmed one checkpoint has been finished, and try to remove the first previous checkpoint.
    
    Specified by:
    
    notifyCheckpointSubsumedAsync in interface CheckpointableTask
    
    Parameters:
    
    checkpointId - The ID of the checkpoint that is subsumed.
    
    Returns:
    
    future that completes when the notification has been processed by the task.
  - dispatchOperatorEvent
```
public void dispatchOperatorEvent(OperatorID operator,
                                  SerializedValue<OperatorEvent> event)
                           throws FlinkException
```
    Specified by:
    
    dispatchOperatorEvent in interface CoordinatedTask
    
    Throws:
    
    FlinkException
  - getProcessingTimeServiceFactory
```
public ProcessingTimeServiceFactory getProcessingTimeServiceFactory()
```
  - handleAsyncException
```
public void handleAsyncException(String message,
                                 Throwable exception)
```
    Handles an exception thrown by another thread (e.g. a TriggerTask), other than the one executing the main task by failing the task entirely.
    In more detail, it marks task execution failed for an external reason (a reason other than the task code itself throwing an exception). If the task is already in a terminal state (such as FINISHED, CANCELED, FAILED), or if the task is already canceling this does nothing. Otherwise it sets the state to FAILED, and, if the invokable code is running, starts an asynchronous thread that aborts that code.
    This method never blocks.
    
    Specified by:
    
    handleAsyncException in interface AsyncExceptionHandler
  - toString
```
public String toString()
```
    Overrides:
    
    toString in class Object
  - getCancelables
```
public final CloseableRegistry getCancelables()
```
  - createRecordWriterDelegate
```
@VisibleForTesting
public static <OUT> RecordWriterDelegate<SerializationDelegate<StreamRecord<OUT>>> createRecordWriterDelegate(StreamConfig configuration,
                                                                                                                                 Environment environment)
```
  - getAsyncCheckpointStartDelayNanos
```
protected long getAsyncCheckpointStartDelayNanos()
```
  - isUsingNonBlockingInput
```
public boolean isUsingNonBlockingInput()
```
    Specified by:
    
    isUsingNonBlockingInput in interface TaskInvokable
    
    Returns:
    
    true if blocking input such as InputGate.getNext() is used (as opposed to InputGate.pollNext(). To be removed together with the DataSet API.
  - maybeInterruptOnCancel
```
public void maybeInterruptOnCancel(Thread toInterrupt,
                                   @Nullable
                                   String taskName,
                                   @Nullable
                                   Long timeout)
```
    Description copied from interface: TaskInvokable
    
    Checks whether the task should be interrupted during cancellation and if so, execute the specified Runnable interruptAction.
    
    Specified by:
    
    maybeInterruptOnCancel in interface TaskInvokable
    
    taskName - optional taskName to log stack trace
    
    timeout - optional timeout to log stack trace
  - getEnvironment
```
public final Environment getEnvironment()
```

Back to Flink Website

Class StreamTask<OUT,OP extends StreamOperator<OUT>>

Field Summary

Constructor Summary

Method Summary

Methods inherited from class java.lang.Object

Methods inherited from interface org.apache.flink.streaming.runtime.tasks.ContainingTaskDetails

Field Detail

TRIGGER_THREAD_GROUP

LOG

inputProcessor

mainOperator

operatorChain

configuration

stateBackend

checkpointStorage

timerService

systemTimerService

mailboxProcessor

Constructor Detail

StreamTask

StreamTask

StreamTask

StreamTask

StreamTask

Method Detail

init

cancelTask

processInput

endData

setSynchronousSavepoint

advanceToEndOfEventTime

createStreamTaskStateInitializer

setupNumRecordsInCounter

restore

invoke

runMailboxStep

isMailboxLoopRunning

runMailboxLoop

afterInvoke

cleanUp

cleanUpInternal

getCompletionFuture

cancel

getMailboxExecutorFactory

isRunning

isCanceled

isFailing

finalize

getName

getCheckpointStorage

getConfiguration

triggerCheckpointAsync

getCheckpointBarrierHandler

triggerCheckpointOnBarrier

abortCheckpointOnBarrier

declineCheckpoint

getAsyncOperationsThreadPool

notifyCheckpointCompleteAsync

notifyCheckpointAbortAsync

notifyCheckpointSubsumedAsync

dispatchOperatorEvent

getProcessingTimeServiceFactory

handleAsyncException

toString

getCancelables

createRecordWriterDelegate

getAsyncCheckpointStartDelayNanos

isUsingNonBlockingInput

maybeInterruptOnCancel

getEnvironment

Back to Flink Website