Task Lifecycle #
A task in Flink is the basic unit of execution. It is the place where each parallel instance of an operator is executed. As an example, an operator with a parallelism of 5 will have each of its instances executed by a separate task.
StreamTask is the base for all different task sub-types in Flink’s streaming engine. This
document goes through the different phases in the lifecycle of the
StreamTask and describes the
main methods representing each of these phases.
Operator Lifecycle in a nutshell #
Because the task is the entity that executes a parallel instance of an operator, its lifecycle is tightly integrated
with that of an operator. So, we will briefly mention the basic methods representing the lifecycle of an operator before
diving into those of the
StreamTask itself. The list is presented below in the order that each of the methods is called.
Given that an operator can have a user-defined function (UDF), below each of the operator methods we also present
(indented) the methods in the lifecycle of the UDF that it calls. These methods are available if your operator extends
AbstractUdfStreamOperator, which is the basic class for all operators that execute UDFs.
// initialization phase OPERATOR::setup UDF::setRuntimeContext OPERATOR::initializeState OPERATOR::open UDF::open // processing phase (called on every element/watermark) OPERATOR::processElement UDF::run OPERATOR::processWatermark // checkpointing phase (called asynchronously on every checkpoint) OPERATOR::snapshotState // notify the operator about the end of processing records OPERATOR::finish // termination phase OPERATOR::close UDF::close
In a nutshell, the
setup() is called to initialize some operator-specific machinery, such as its
its metric collection data-structures. After this, the
initializeState() gives an operator its initial state, and the
open() method executes any operator-specific initialization, such as opening the user-defined function in the case of
initializeState()contains both the logic for initializing the state of the operator during its initial execution (e.g. register any keyed state), and also the logic to retrieve its state from a checkpoint after a failure. More about this on the rest of this page.
Now that everything is set, the operator is ready to process incoming data. Incoming elements can be one of the following:
input elements, watermark, and checkpoint barriers. Each one of them has a special element for handling it. Elements are
processed by the
processElement() method, watermarks by the
processWatermark(), and checkpoint barriers trigger a
checkpoint which invokes (asynchronously) the
snapshotState() method, which we describe below. For each incoming element,
depending on its type one of the aforementioned methods is called. Note that the
processElement() is also the place
where the UDF’s logic is invoked, e.g. the
map() method of your
Finally, in the case of a normal, fault-free termination of the operator (e.g. if the stream is
finite and its end is reached), the
finish() method is called to perform any final bookkeeping
action required by the operator’s logic (e.g. flush any buffered data, or emit data to mark end of
processing), and the
close() is called after that to free any resources held by the operator
(e.g. open network connections, io streams, or native memory held by the operator’s data).
In the case of a termination due to a failure or due to manual cancellation, the execution jumps directly to the
and skips any intermediate phases between the phase the operator was in when the failure happened and the
snapshotState() method of the operator is called asynchronously to the rest of the methods described
above whenever a checkpoint barrier is received. Checkpoints are performed during the processing phase, i.e. after the
operator is opened and before it is closed. The responsibility of this method is to store the current state of the operator
to the specified state backend from where it will be retrieved when
the job resumes execution after a failure. Below we include a brief description of Flink’s checkpointing mechanism,
and for a more detailed discussion on the principles around checkpointing in Flink please read the corresponding documentation:
Data Streaming Fault Tolerance.
Task Lifecycle #
Following that brief introduction on the operator’s main phases, this section describes in more detail how a task calls
the respective methods during its execution on a cluster. The sequence of the phases described here is mainly included
invoke() method of the
StreamTask class. The remainder of this document is split into two subsections, one
describing the phases during a regular, fault-free execution of a task (see Normal Execution), and
(a shorter) one describing the different sequence followed in case the task is cancelled (see Interrupted Execution),
either manually, or due some other reason, e.g. an exception thrown during execution.
Normal Execution #
The steps a task goes through when executed until completion without being interrupted are illustrated below:
TASK::setInitialState TASK::invoke create basic utils (config, etc) and load the chain of operators setup-operators task-specific-init initialize-operator-states open-operators run finish-operators wait for the final checkponit completed (if enabled) close-operators task-specific-cleanup common-cleanup
As shown above, after recovering the task configuration and initializing some important runtime parameters, the very
first step for the task is to retrieve its initial, task-wide state. This is done in the
setInitialState(), and it is
particularly important in two cases:
- when the task is recovering from a failure and restarts from the last successful checkpoint
- when resuming from a savepoint.
If it is the first time the task is executed, the initial task state is empty.
After recovering any initial state, the task goes into its
invoke() method. There, it first initializes the operators
involved in the local computation by calling the
setup() method of each one of them and then performs its task-specific
initialization by calling the local
init() method. By task-specific, we mean that depending on the type of the task
TwoInputStreamTask, etc), this step may differ, but in any case, here is where
the necessary task-wide resources are acquired. As an example, the
OneInputStreamTask, which represents a task that
expects to have a single input stream, initializes the connection(s) to the location(s) of the different partitions of
the input stream that are relevant to the local task.
Having acquired the necessary resources, it is time for the different operators and user-defined functions to acquire
their individual state from the task-wide state retrieved above. This is done in the
initializeState() method, which
initializeState() of each individual operator. This method should be overridden by every stateful operator
and should contain the state initialization logic, both for the first time a job is executed, and also for the case when
the task recovers from a failure or when using a savepoint.
Now that all operators in the task have been initialized, the
open() method of each individual operator is called by
openAllOperators() method of the
StreamTask. This method performs all the operational initialization,
such as registering any retrieved timers with the timer service. A single task may be executing multiple operators with one
consuming the output of its predecessor. In this case, the
open() method is called from the last operator, i.e. the
one whose output is also the output of the task itself, to the first. This is done so that when the first operator starts
processing the task’s input, all downstream operators are ready to receive its output.
Consecutive operators in a task are opened from the last to the first.
Now the task can resume execution and operators can start processing fresh input data. This is the place where the
run() method is called. This method will run until either there is no more input data (finite stream),
or the task is cancelled (manually or not). Here is where the operator specific
methods are called.
In the case of running till completion, i.e. there is no more input data to process, after exiting from the
method, the task enters its shutdown process. Initially, the timer service stops registering any new timers (e.g. from
fired timers that are being executed), clears all not-yet-started timers, and awaits the completion of currently
executing timers. Then the
finishAllOperators() notifies the operators involved in the computation by
finish() method of each operator. Then, any buffered output data is flushed so that they can be processed
by the downstream tasks. Then if final checkpoint is enabled, the task would
wait for the final checkpoint completed
to ensure operators using two-phase committing have committed all the records.
Finally the task tries to clear all the resources held by the operators by calling the
close() method of each one. When opening the different operators, we mentioned that the order is from the
last to the first. Closing happens in the opposite manner, from first to last.
Consecutive operators in a task are closed from the first to the last.
Finally, when all operators have been closed and all their resources freed, the task shuts down its timer service, performs its task-specific cleanup, e.g. cleans all its internal buffers, and then performs its generic task clean up which consists of closing all its output channels and cleaning any output buffers.
Checkpoints: Previously we saw that during
initializeState(), and in case of recovering from a failure, the task
and all its operators and functions retrieve the state that was persisted to stable storage during the last successful
checkpoint before the failure. Checkpoints in Flink are performed periodically based on a user-specified interval, and
are performed by a different thread than that of the main task thread. That’s why they are not included in the main
phases of the task lifecycle. In a nutshell, special elements called
CheckpointBarriers are injected periodically by
the source tasks of a job in the stream of input data, and travel with the actual data from source to sink. A source
task injects these barriers after it is in running mode, and assuming that the
CheckpointCoordinator is also running.
Whenever a task receives such a barrier, it schedules a task to be performed by the checkpoint thread, which calls the
snapshotState() of the operators in the task. Input data can still be received by the task while the checkpoint is
being performed, but the data is buffered and only processed and emitted downstream after the checkpoint is successfully
Interrupted Execution #
In the previous sections we described the lifecycle of a task that runs till completion. In case the task is cancelled at any point, then the normal execution is interrupted and the only operations performed from that point on are the timer service shutdown, the task-specific cleanup, the closing of the operators, and the general task cleanup, as described above.